Showing posts with label home theater. Show all posts
Showing posts with label home theater. Show all posts

Yamaha RX-Z7BL 7.1-Channel High-End Network Home Theater Receiver (Black) Review

Yamaha RX-Z7BL 7.1-Channel High-End Network Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I've had mine for a couple of months and am completely pleased with the purchase. At first I had my doubts, since I've always had much more expensive component systems. This is my fourth Yamaha receiver, but the others I used for the kids, and for the whole-house stereo system.
I had just switched from a 9" crt projector to a Panasonic 3000 LCD projector, and decided that going fully digital was in order. I spent weeks reading reviews, downloading both user and service manuals for about a dozen brands and models. When all was said and done the decision really was quite easy. This thing has virtually everything a person could want.
I have a large dedicated theater that is designed for both reclining and listening to music, or for viewing movies on a 120" screen. I have carefully assembled a system that does both flawlessly, and I didn't want to mess it up when it came to this purchase. This came as close as I could have hoped for. Mind you, it isn't as good as my old system when it comes to sound. But then my power amp alone was $4500, and could power a normal full-sized movie theater's speaker system.
This does have plenty of power for my nine-speaker setup. It just has a hair less detail in the sound. Before I could hear if a pianist hadn't fully trimmed his or her fingernails, because you could hear the ends click when they hit the ivory on the piano keys. This doesn't quite get there.
That being said, my wife likes this much better because she hated hearing every tiny detail, especially the bad mixing and mic placement on so many recordings. She especially hated listening to Midori play the Paganini caprices - hearing Midori slide her fingers into position when my wife had spent years believing that to be one of the best performances ever. She is back to loving the performance, and I have to say I like it better too. Detail can get a bit overrated, because you get the bad with the good.
As to video, this thing leaves nothing to be desired. One of my DVD players is an Oppo 981, which always gets great reviews, and is an excellent player, especially for upconversion of older DVDs to 1080p. At first I was just going to have this pass the signal straight through without any alteration. After going back and forth a bunch of times I actually chose to have this receiver do the conversion on everything, from the analog sources as well as the digital ones. It does a top-notch job and I have no complaints.
That being said, there are so many choices and possibilities it almost gets to the point of being frustrating. As you pop through the possibilities of hearing the music in a cathedral in Munich or a church in Freiburg it is pretty easy to lose focus on finding what sound you really like. My suggestion is to relax in an easy chair, close your eyes, and have someone else do the changing of settings so that you really do select the best setting.
For those building their system up from something of lesser quality (meaning most of the units out there), or for those who have been like me and have gotten tired of lugging around massive components that take up lots of room and generate lots of heat, this has something for most everyone to like.
The possible negatives of the unit are: needs at least a couple of inches of ventilation on the top for air circulation (could just hook-up a 90 or 120mm computer case fan if things are tight); like most of these receivers the remote (there actually are two remotes that come with (one full function and the other a stripped down model)) could be better and might take a little trial and error; for those like me who are used to having more than one subwoofer this is designed for just one (although my Supernova Earthquake 15" nearly knocked marble off the wall in the master bath when I was watching the newer version of War of the Worlds).
1/29/2010 Just wanted to say that I have installed the firmware updates and have yet to have a single negative thing occur concerning this receiver. Originally I screwed a few things up and Yamaha support always got back within a day. Turns out I was at fault, but one interesting item is that I had an audio CD in the player and thought it was a DVD. The output gave me a green screen, and that really had me scratching my head, and that of the Yamaha engineer, until I checked what was in there. Otherwise, I have been using the PS3 for the Blu-ray movies, Oppo for standard, and absolutely everything has been superb. Odd to have not one complaint.
12/15/2010 Not really anything to add except it works flawlessly. I still wish there were fewer choices in terms of shaping the audio output. When I find a setting I really like with one kind of music it might be a month before I come back to it again. It might help if I kept a notebook by it and just made notes as to the combinations I like. I still mostly keep it on seven-channel stereo unless I really don't like how it sounds. Other than that I haven't even looked at my old equipment for months now. As stated before, there has not been a single issue with this receiver. I'm 100% satisfied.

Click Here to see more reviews about: Yamaha RX-Z7BL 7.1-Channel High-End Network Home Theater Receiver (Black)

Expanding on the highly acclaimed Z-Series, Yamaha introduces another benchmark: the RX-Z7, a 7.1-channel Network AV Receiver. This new receiver provides an enormous range of exciting multimedia features, extensive custom installation capabilities, video adjustment features and cutting edge technologies. The RX-Z7 performance provides great enjoyment for the home theater experience.

Buy NowGet 32% OFF

Click here for more information about Yamaha RX-Z7BL 7.1-Channel High-End Network Home Theater Receiver (Black)

Read More...

Harman Kardon AVR-354 7x75W 7.1 Channel Home Theater Receiver Review

Harman Kardon AVR-354 7x75W 7.1 Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
It's unfortunate about the previous poster but I have the same unit and it is incredible! The unit has all the bells and whistles that you would expect on a much higher priced receiver. Do some research on the the chips used in this thing, they are incredible and are found only in a $5000 high end competitors line. The weakness of this receiver is that it can sometimes be too rich of a sound and lacks the crisp high that some look for because, honestly the degraded sound that we have received from companies like Sony and what we listen to in our cars have ruined our idea of what even sounds are. Just a side note, one of my buddies was the one who brought this "weakness" to my attention because he said it didn't have enough high range. I told him well watch the whole movie and lets see how fatigued your ears feel. Afterward, he was amazed how nice and easy it is to listen to this HK. The strength is it's punch and ability in the home theater to make gun fire sound like gun fire and not rocks being thrown against a tin roof. HK doesn't disappoint in my opinion with this receiver and it's too bad one customer, and the only review had a experience that is honestly out of this world. HK customer support is probably one of the best in the world, and are often recognized for that fact. Besides one month old and breaks, why not take it back to Best Buy?

Click Here to see more reviews about: Harman Kardon AVR-354 7x75W 7.1 Channel Home Theater Receiver

Harman Kardon AVR-354 7x75 watt 7.1 Channel Home Theater Receiver is your all-in-one receiver for your home theater system. This 7.1-Channel A/V receiver includes HDMI switching and audio/video processing. With 525 watts (75 watts x 7 channels) at your fingertips, movies will put you into the heart of the action. Picture this! The AVR-354 not only includes a host of powerful features such as DCDi by Faroudja video processing, Simplay HD'-verified HDMI' 1.1 connectivity with full audio processing as well as EzSet/EQ'and XM Ready technology - it uses a colorful user interface to make system setup and operation easier than ever. Add full multi-room capability with A-BUS connectivity and you have pure Harman Kardon sound everywhere in the house.

Buy Now

Click here for more information about Harman Kardon AVR-354 7x75W 7.1 Channel Home Theater Receiver

Read More...

MartinLogan Purity Fully-Powered Hybrid Electrostatic Loudspeaker (Single, Cherry) Review

MartinLogan Purity Fully-Powered Hybrid Electrostatic Loudspeaker (Single, Cherry)
Average Reviews:

(More customer reviews)
I have been a long-time user of Martin-Logan products and knew both partners when they sold stereo equipment in Lawrence, Kansas back in the early 80's. My first product to hear was the Monolith and I owned the original Quest. When buying M & L you must realize that you are buying a piece of scientific equipment. One, you are purchasing an electrostatic panel and two, you are purchasing a speaker that will need to be placed OPTIMALLY in your room to get the best sound possible. Those rules are: Electrostatic elements DO NOT LIKE a smokey environment. If you smoke or you burn incense and/or candles, over time your electrostatic panels will accumulate a film that will affect the sound of the speaker. Since the panel has an electronic charge, it will have the necessary ingredients to form that film from air-borne contaminants.
Location, location, location. All electrostatic panels push sound from the front AND from the rear. If you do not have your speakers placed away from the back wall, you will find that the sound from the rear of the panel will be out-of-phase compared to the sound from the front. The two sounds will cancel each other either partially or fully making a muddy sound. You want the sound to be ideal since the sound pressure from the rear of the panel is what gives that "encompassing" sound that these speakers are known for. Ideally, you will need at least two feel of space behind the panel and the speaker will need to be toed in to eliminate that interference. If you have a room that is not large enough to place these speakers and still contain your large screen TV AND THE REST of your furniture, then don't purchase them, you will not get the enjoyment from them as you might think you will. If you follow the rules, you will have the most enjoyable speaker made by man.
Now the power. You may ask; "why does it have a internal power amplifier?" One of the early requirements with M & L speakers were that they were quite power hungry. Later models addressed that problem, but they still required a power amplifier that moved a lot of Current (amperes) not Power (watts). Consequently, people who bought these speakers also had a lot of money rapped up in an expensive high current power amplifiers. Since these M & L's have the power built in and are matched to the speaker, the extra money to purchase these speakers are well worth it. Remember, you are purchasing TWO mono-power amps when you purchase two speakers. That alone is worth at least $1200 if you were to purchase two high end power mono current amps by themselves. You can also use the speakers to play back any device that has a built in volume control and a line level output source, e.g iPod, Satellite Radio, even your computer. As a surround system, you will need at least four of these units plus a center channel or another one of M & L's speakers that are matched to these units. Remember, if you use self powered speakers you are running line-level signal wires instead of speaker wires that tend to loose efficiency over long runs as do the line-level signals but not as much and which are more stable.
All in all, these are probably the best value out there for a high end speaker that has the sonic wonderment that most people will marvel at. If you ever auditioned a pair of these speakers, you will not want anything else in your home.

Click Here to see more reviews about: MartinLogan Purity Fully-Powered Hybrid Electrostatic Loudspeaker (Single, Cherry)

Product Description Coming

Buy NowGet 41% OFF

Click here for more information about MartinLogan Purity Fully-Powered Hybrid Electrostatic Loudspeaker (Single, Cherry)

Read More...

Klipsch Synergy SUB-12 Subwoofer Speaker (Single, Black) Review

Klipsch Synergy SUB-12 Subwoofer Speaker (Single, Black)
Average Reviews:

(More customer reviews)
I recently replaced a Polk Audio PSW-12 with the Synergy. This is an amazing upgrade. It mixes well with the Polk RTi-8 Fronts, and CSi-3 Center, R15 surround and Infinity Primus 250 Back Surround. All of these speakers are powered by an Onkyo 803.
The previous sub had good bass response, but was very directional. What I mean by that is I could hear the bass coming from the sub. It did not fill the room. The Synergy fills the room, and actually makes the bass sound like it is coming from the individual speakers. If you increase the gain, it will shake the house.
Installation was very simple. I used the LFE connection, and plugged it in to power. It also has an automatic power save mode, and a light on the front to let you know what mode it is in. Over all, a great value!

Click Here to see more reviews about: Klipsch Synergy SUB-12 Subwoofer Speaker (Single, Black)

The Synergy Series SUB-12 subwoofer speaker delivers enough power and bass extension to shake foundations. It uses high-quality materials and the most reliable components to create a rock-solid impact that makes your movies and music come alive. In addition to its ability to play louder and go deeper than anything else in its class, the SUB-10 subwoofer features a newly refined, but aggressive, industrial design. Available in a black finish with titanium accents, this outstanding subwoofer matches the entire Synergy Series lineup in style-and in performance. The Synergy Series SUB-12 subwoofer speaker gets its room-shaking intensity from a 12" down-firing driver, coupled to a highly efficient BASH(R) amplifier that creates 300 watts of continuous power and 650 watts of dynamic power. A phase control integrates the subwoofer with the other speakers in the system for consistent audio quality. An "auto power" feature enables the subwoofer to turn itself on and off (standby) automatically; a color LED display on the front of the subwoofer indicates whether the unit is "on" or in "standby" mode.Wrapping technical superiority and eye-catching cosmetics into one affordable package, the SUB-12 subwoofer perfectly anchors any home theater or two-channel system.

Buy Now

Click here for more information about Klipsch Synergy SUB-12 Subwoofer Speaker (Single, Black)

Read More...

Denon AVR-3808CI 7.1-Channel Multizone Home Theater Receiver with Networking Review

Denon AVR-3808CI 7.1-Channel Multizone Home Theater Receiver with Networking
Average Reviews:

(More customer reviews)
I have been waiting a while for "the perfect receiver". However, I have come to the conclusion that this is as close to perfect as I am going to find for my needs right now. I am using all 4 HDMI inputs (PS3, Oppo 980H, Directv HR20, and a Sony Vaio computer). The Denon has worked flawlessly with SACD, DVD-A, and lossless audio sources from my BluRay movies.
For sound quality, it is important to get the speakers setup properly. Denon's auto setup with the included mic makes this a very simple setup. I have heard that it helps to take measurements from all over the room, so I setup 5 listening locations. The sound quality is fantastic. I do have an spl meter, but I have not had it out to fine tune the setup just yet. It already sounds fantastic. The Oppo has the ability to send out a DSD multi-channel signal for its SACD and these sound fantastic on the Denon.
I am not really using the video upscaler very much since most of the signals I am inputting are already HD. In other words, the Denon mainly sends out the signals untouched, so it is hard to complain.
The ability to update the firmware over the internet connection is what I believe sets this receiver apart from the competition. For me, this was the deciding factor. With all of the new tech in these receivers, I do not want to have to carry the thing into a service location every time it needs an update.
I should mention that I played some music coming from my computer using the network interface and it worked okay. It did take a few seconds to retrieve license information for Yahoo Music DRM files, but I bet they improve on that in the future.
The downsides are small, but should be mentioned. The remote is okay for setting up the system, but it is going into a drawer with my other remotes now that I have my Harmony 880 universal programmed for all of the general functions that I need. Also, the GUI takes some getting used to. I like the ability to rename the inputs and choose what video inputs go with the audio inputs. However, it was not something that I picked up and setup in a few minutes. It is better than my old Denon AVR-3300, so at least they are going in the right direction!


Click Here to see more reviews about: Denon AVR-3808CI 7.1-Channel Multizone Home Theater Receiver with Networking

Denon AVR-3808CI A/V Multi-Source/Zone with Network Streaming Receiver

Buy Now

Click here for more information about Denon AVR-3808CI 7.1-Channel Multizone Home Theater Receiver with Networking

Read More...

Denon AVR-789 630-Watt 7.1 Channel Home Theater Receiver Review

Denon AVR-789 630-Watt 7.1 Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I've done tons of research on a receiver in this price range. I can tell you that this unit is the best for the money. I've research the yammy 663, onkyo 606, and the 789/1909. The 789 and the 1909 are the same unit just made for different retailers. The four digit receivers from denon are for local retailers and the 789 is manufactured for higher volume retailers like BB or CC. I tried two 606s before spending the extra $150 on this model. The first 606 i had suffered from the humm/buzz problem that's all over the avsforum. The second unit i had dropped the video signal after a couple minutes of switching sources or powering the unit on and off. So i went with the 789 and couldn't be happier. My new 7.1 sounds amazing and the Audessey features are the best. i wouldn't attempt to set up a 7.1 with out it. The remote kinda sucks, but i got a Harmony 890, so all remotes go into storage anyway. I have it hooked up to a ps3, 360, comcast cable box, denon dvd, vcr, and ipod. All the SD signals get pushed to 1080p. The upscaling is so much better than the 606 it's not even funny. i would recommend anyone looking for a hdmi receiver that upscales to get this model.

Click Here to see more reviews about: Denon AVR-789 630-Watt 7.1 Channel Home Theater Receiver

Equipped with the latest video and audio processing functions, the AVR-789 brings high performance surround sound and extensive video flexibility at a truly affordable price. For the ultimate audio experience, the AVR-789 features Dolby TrueHD and DTS-HD Master Audio decoding to handle the explosive soundtracks found on many of today's advanced Blu-ray high definition discs, along with Dolby Digital Plus and DTS ES 6.1 surround decoding functions. The video section includes Faroudja's renowned DCDi processing and upconversion to provide near-HD picture quality from conventional sources such as cable, satellite and DVD, while at the same time providing a single video output connection to your HDTV. In addition, the video section features the latest specification HDMI v1.3a signal handling, with three inputs capable of handling Dolby TrueHD and DTS-HD Master Audio soundtracks as well as uncompressed LPCM multi-channel sources. Setup and operation are a snap, aided by Denon's enhanced icon-based on screen display that also features a screen saver. To eliminate jarring shifts in volume between TV shows and commercials, the AVR-789 features Audyssey Dynamic Volume automatic volume-leveling system, as well as Audyssey Dynamic EQ to ensure rich bass and smooth tonal balance, even at low volume levels. Audyssey MultEQ in-room acoustic optimization and enhanced multimedia connectivity are just a few of the many additional advanced features that the AVR-789 offers.

Buy Now

Click here for more information about Denon AVR-789 630-Watt 7.1 Channel Home Theater Receiver

Read More...

Denon AVR-989 805-Watt 7.1 Channel Home Theater Receiver Review

Denon AVR-989 805-Watt 7.1 Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
Excellent receiver with all the functions that you need for 5.1 or 7.1 system. Only problem is that the remote and the manual is very confusing and poorly documented. I get around this by buying Harmony One universal remote. This is my second Denon (my previous one was avr-888) and I have been happy with the quality of the sound and the video.

Click Here to see more reviews about: Denon AVR-989 805-Watt 7.1 Channel Home Theater Receiver

The versatile AVR-989 provides unparalleled audio and video signal processing and switching flexibility, and is fully equipped to handle even the most sophisticated home theater setups. The video section features four HDMI v1.3a inputs, that can accommodate high definition multi-channel LPCM, Dolby TrueHD and DTS-HD Master Audio soundtracks. For standard definition sources such as DVD, the on-board Faroudja DCDi video processing and upconversion system provides near-HD picture quality. Denon's advanced surround sound decoding section is powered by dual high-precision 32-bit floating point DSP processors, a feature previously found only on Denon's top-end models. This provides breathtaking surround sound quality from virtually any source. Audyssey Dynamic Volume automatically eliminates jarring volume jumps between TV shows and commercials, and Audyssey Dynamic EQ ensures rich bass and smooth tonal balance, even at low volume levels. Audyssey's MultEQ in-room acoustic optimization system provides up to eight measurement points, smoothing the overall balance for the most natural tonal quality everywhere in the listening space. Setup and operation are a snap, aided by Denon's enhanced icon-based on screen display that also features a screen saver. Featuring both speaker level and pre-amp level second zone stereo outputs, the AVR-989 is the ideal centerpiece for a superb whole-home entertainment system.

Buy Now

Click here for more information about Denon AVR-989 805-Watt 7.1 Channel Home Theater Receiver

Read More...

Denon AVR-988 7.1-Channel Multizone Home Theater Receiver Review

Denon AVR-988 7.1-Channel Multizone Home Theater Receiver
Average Reviews:

(More customer reviews)
This was a strong performing receiver at $1200. Now it is an amazing value. Why?
Pros
1) Clean high current power- in the end, the most important thing. Strip away all the bells and whistles and "features" and listen to it. Many receivers brag about 100 watts of power and yet sound thin. Denon is known for amplifier quality. This Denon receiver was designed for the $1200 instead of the $500 price point and has the parts quality that reflects it (good power supply, shielding, and separate circuit boards for Digital, Analog Video and Analog Audio) The receiver has 110 watts for 7 channels and will drive your speakers for better bass and clarity.
2) 1080P Upconversion- there is two types of upconversion. In other words, what are you doing to a VCR or other analog video signal to make it HDMI? Some receivers "Transcode", which means they convert from regular composite video, S-Video, or Component video to HDMI. This is done for convenience. You get all of your sources on one HDMI cable going into the TV, but don't expect any improvement in video quality. The other way of conversion is called upconversion or "scaling." Now you are taking a 480i signal and converting it to 1080i or 1080P. The quality of that process varies widely. Some upconverters make the image look horrible. Some only upconvert to 1080i. Denon uses a Faroudja FLi2310 video processor that provides video scaling up to 1080p resolution. On other words, it makes your old stuff look good. Not as good as true HD source material, but it is a significant improvement.
3) Dolby True HD and DTS-HD Master Audio- decodes them both.
4) Multi-Zone/Multi-Source: Use 5 of the channels for home theater and the 2 other channels to power a second zone (like speakers for an outdoor deck) with a different source. So you can watch movies in the family room and still have a CD playing outside. The second zone can be fed from the coax digital or optical digital input (rather than only analog), something that many other multi-source receivers can't do.
5) Auto Setup: Many people buy a receiver and never bother to set it up to compensate for their room and speakers. I prefer to set up a receiver manually for inputs, speaker size and distance and it can make a huge difference in sound quality. Denon makes setup easy. Once you plug in the microphone, the receiver automatically detects and enters in auto-setup mode. The Audyssey Multi EQ XT can be setup for 8 favorite listening setups...you can calibrate it for a couple watching movies vs a group watching a football game. There is a large difference among auto EQs, and Audyssey does a good job.
6) Auto Lipsync- Have you noticed the image not match up with the sound? Rather than put up with that movie experience, the Denon receiver will allow you to correct for the delays between the video and audio processing.
7) Shh...don't tell anyone, but this receiver is very, very close in performance to Denon's AVR 2808. Just less expensive!
8) Yes, it even still has a phono input.
9) Music restorer- Playing an iPod? Use this to make compressed audio sources sound less worse.
Drawback
Although it will convert other inputs to HDMI, it only has two HDMI inputs. For those who want more HDMI inputs, add a HDMI switcher box. One of the best reviewed ones is the Oppo. It works with Tivo, Comcast cable boxes, and with Denon receivers.
OPPO HM-31 Certified HDMI 1.3 and 1080p Switch

Click Here to see more reviews about: Denon AVR-988 7.1-Channel Multizone Home Theater Receiver

A/V Multi Source/Zone Receiver

Buy Now

Click here for more information about Denon AVR-988 7.1-Channel Multizone Home Theater Receiver

Read More...

MartinLogan DYNBLD Dynamo 10-Inch Subwoofer (Single, Black) Review

MartinLogan DYNBLD Dynamo 10-Inch Subwoofer (Single, Black)
Average Reviews:

(More customer reviews)
This is a very well built subwoofer with many of the same parts and most of the technology taken from the upper line (Grotto, Depth, Descent) of ML subs. It has the same solid 10" aluminum driver found in all high-end subs. It was designed and engineered in the US by ML and built in China to keep costs down, however, I did not notice any build-quality issue. I compared the Dynamo head to head with the ML Grotto (twice the price) and found that they both sounded great. The Grotto adds a servo circuit, a tad better cabinet and a little more power (250 vs. 200) but in the long run, I could not justify the price difference.
The Dynamo has deep, tight bass with no boom. It blends seamlessly with all speakers that I have tried. If set up correctly and this is easy to do, you cannot tell where the sub is located in your room. I am using it for 2 channel audio but it can work well for home theater as well, just don't expect ground-shaking boom. Although I think you would be wasting its potential. It also has the option of front firing and down firing by just rotating it on its platform/stand, I set it up as front firing since I found it provide tighter bass/more musical/accurate then down-firing on my carpet. I also did not miss the servo circuit on the more expensive ML sub. The servo would have been more important if the Dynamo had a larger driver (12" plus) due to the inherent distortion issues with large drivers. An 8" - 10" driver does not have as many of these issues, hence the servo circuit not missed much.
You cannot go wrong with the Dynamo for some of the best quality bass at the best price available today.
Strengths:
Build quality. Deep, tight bass...no boom here. Blends seamlessly with every speaker I tried. Easy to set up. Great set up instructions furnished by ML. Price. And a product designed and supported by one of the best speaker builders in the world. Call ML anytime and they will answer any question and make suggestions on proper set up, etc.
Weaknesses:
I would have preferred that whether you choose front firing or down firing, the amp controls would be easily accessible. When in front firing position, the controls are on the bottom. However, once set up, this should not be a problem.

Click Here to see more reviews about: MartinLogan DYNBLD Dynamo 10-Inch Subwoofer (Single, Black)

The Dynamo is a versatile subwoofer with a 10" aluminum woofer and a 200 watt internal amplifier.It features a user-configurable design which can be used in either the forward or downward firing position.The advanced control system of the Abyss allows simultaneous connection of 2-channel stereo music and multi-channel home theater.The base response for the Abyss ranges from 25 to 120 Hz.

Buy Now

Click here for more information about MartinLogan DYNBLD Dynamo 10-Inch Subwoofer (Single, Black)

Read More...

Denon AVR2310CI 7.1-Channel Multi-Zone Home Theater Receiver with 1080p HDMI Connectivity Review

Denon AVR2310CI 7.1-Channel Multi-Zone Home Theater Receiver with 1080p HDMI Connectivity
Average Reviews:

(More customer reviews)
I looked at all the brands and settled on Denon because they offer a very complete set of features for the money. This model is basically identical to the Denon AVR-890 model sold in big box stores except it has some extra features that are useful for custom installations (if you have your HT installer do it for you) and has two remotes instead of one on the 890
What I liked about this model over many of the competitors:
- Audyssey MultEQ is an advanced auto setup system which adjusts all the settings for your speakers. You plug in the included microphone, it outputs test tones and calculates the optimum settings for you. It takes measurements over 6 positions to ensure that the calibration settings work well over the whole listening area. Audyssey (in my opinion) is a more sophisticated system than what you would find in the competitors like Pioneer and Yamaha. Denon implements the complete set of Audyssey MultEQ features, shows you the resulting settings, and permits you to tweak the settings afterwards even.
- Audyssey Dynamic EQ - This is a GREAT feature. It's not unlike the Dolby Volume feature offered on other brands. What it does is it makes the sound more natural when you have the volume control lower than the reference standard (the volume the studio used for their reference). When you listen at low volumes, the human ear becomes less sensitive to certain tonal ranges, so this circuit helps restore the tonal balance of the sound. It also balances the level of the channels based on your volume level to make sure you can hear the rear channels better at lower volumes. I think this feature works GREAT and it's something anybody can notice. I think this is a must-have feature. Again Denon is to be commended for offering this feature on all their receivers in 2009
- Dynamic Volume is a useful feature to keep the sound level from blasting you when commercials come on. It's nice for watching TV.
- Denon has better control over video and audio settings. You can adjust the crossover frequency individually for each set of speakers. So if you have large speakers in the front and small satellites in the back, you can customize the bass management individually for each pair of speakers, taking advantage of each speakers' full bandwidth. For some reason many other receivers, Pioneer, Marantz, Yamaha often don't have this per-speaker adjustment. If you use Audyssey to set up your system, the Denon will use this capability to optimize your speakers' bass capabilities.
Also, Denon remembers the VIDEO settings for each input so you can have custom brightness, contrast, color for each input.
- Denon 890/2310 uses the Anchor Bay ABT2010 video processor which is a top grade processor. It does a superb job of scaling and deinterlacing video (Anchor Bay's video processor is well reviewed) probably as good or better than most TVs. It works for both analog sources AND HDMI, converting all your video to the maximum resolution of your TV up to 1080P or any other resolution that is optimal for your set. You do have the option to turn it off and passthrough the signals if you don't see a benefit. For most people, unless you have a top of the line TV, this processor can benefit all your sources
- Many receivers take a long time to resync the HDMI signal when you change inputs. On my previous Onkyo, the screen would blank out for 7-12 seconds when I switched from Cable to DVD. The Denon does it as quick as any I've seen, only 2-3 seconds
- Denon has Graphical User Interface over analog and HDMI connections. So you can adjust the settings while a video signal is being played and you will see the menus overlaid on top (especially useful when you are adjusting video settings). Many other receivers only do GUI overlay for analog connections, but not HDMI. With the Denon 890, you can see Volume Level indicator overlaid over the picture while you are playing back HDMI sources.
- It runs very cool. Many receivers run very hot but this one is good if your ventilation is more limited in your AV cabinet.
- It offers Dolby PLIIz, which allows you to run 7.1 speakers and give you height channels (five speakers in the front). I don't use this feature but it's an improvement over a normal 7.1 setup.
The BAD:
- This model does not have Preamp outputs so you can't add an external amp later if you need more power.
- The manual is hard to understand. Fortunately, there are some great FAQ web pages put up by one guy (search for Denon FAQ)which takes all the mystery out of the settings and adjustments
So, the Denon 890 is a superb product that is leading the pack in this price range. They didn't cripple the product in any way except the lack of preamp outputs.
As far as sound quality, it's debatable whether brand X is better than brand Y, but I can say Denon doesn't make poor performing products in general. Their amps are solid performers that are average to above average in meeting their rated power specifications. Even thought this unit isn't the heaviest chassis, it still packs a punch for its price range.

Click Here to see more reviews about: Denon AVR2310CI 7.1-Channel Multi-Zone Home Theater Receiver with 1080p HDMI Connectivity

The new AVR-2310CI was designed for consumers wanting exceptional audio and video performance. Its 7-channel amplifier produces 735-watts of total power (105 per channel), delivering detail and dynamics to music and movie soundtracks. The amplifiers can be configured for 7.1 channel surround sound, or a 5.1 channel system in the 'main" room and power a pair of speakers in a second 'zone". It's equipped with 1080p compatible HDMI 1.3a Repeating technology, delivering both audio and video to your HDTV with single HDMI cable. This HDMI connectivity supports the latest generation surround sound formats available on Blu-ray disc, including Dolby TrueHD and DD+, dts-HD and dts-HR. Also included is Dolby Laboratories new Pro Logic IIz Matrix decoding featuring front height effects channels that expands front soundstage. The AVR2310CI boasts a number of Audyssey technologies. Advanced Audyssey MultEQ analyzes a speaker systems interaction with room acoustics, and then delivers custom tailored correction processing to optimize clarity and tonal balance throughout the listening space. Audyssey Dynamic Volume is an automatic volume-leveling system that tracks audio dynamics to eliminate the irritating volume swings between TV shows and commercials. Audyssey Dynamic EQ is also on board to ensure rich bass and smooth tonal balance at low volume listening levels. In addition to enhanced HDMI 1.3a repeating (5 in, 1 out), the AVR2310CI features 1080p i/p conversion, analog to HDMI upscaling and HDMI to HDMI scaling. Video conversion is accomplished using a premium Anchor Bay Technologies 2010 chip set featuring 10-bit multi-cadence processing. This chip set also provides video noise reduction, picture enhancement, and adjustment capabilities not available on lower priced models. The AVR2310CI also features component video switching (2 in, 1 out), seven analog inputs, and multi-zone (2) / multi-source (2) capability.

Buy NowGet 6% OFF

Click here for more information about Denon AVR2310CI 7.1-Channel Multi-Zone Home Theater Receiver with 1080p HDMI Connectivity

Read More...

BIC PL-200 Acoustech Platinum Series Subwoofer Review

BIC PL-200 Acoustech Platinum Series Subwoofer
Average Reviews:

(More customer reviews)
I posted this "mini review" on a well known forum, seems there are a lack of reviews on this product, so, hope this helps.
Well, I finally got my PL-200 today. I have been testing and calibrating for the last couple hours.
I did a comparison of the PL-200 versus my Axiom EP350 sub. PL-200 = $329.00 and my EP350 = $758.00
The results surprised me, but not so much really. I will just go ahead say this. The PL-200 kicked my EP350's arse!
Now, keep in mind, I have much more testing to do. I first adjusted both subs to 75db using my digital sound level meter. C weighted & set to slow. The first thing that caught my attention was while running my test tones starting at 80HZ down to 15hz for each sub independently, was my EP350 would not even register any decibels at 22hz. The PL-200 easily hit 76db @22hz. I knew then the Axiom sub was in trouble.
Then I went on and ran MCACC at full auto, tweaked my levels, then ran MCACC advanced mode keeping the speaker settings.
I first played a lot of favorite songs, from the deep bass of "Peg" from Steely Dan to Dream Theater to Queensryche to Metallica's Black CD. The PL-200 filled out my room (4500cuft) nicely, no boominess, no muddiness, just clean well rounded tight bass. Kick drums hit hard and in my face. I pretty much compared a lot of songs with and without the Axiom sub.
I have each sub in the far corners of the room right outside my Axiom M80 towers. I must say I'm lovin the PL-200 so far.
Unfortunately, I only have 1 Blue ray disc at this time and it was Twilight New Moon. Not the best movie for lows. But, I'll have to wait for some more movies from Netflix to test the PL-200 further.
But what I did hear (both subs running) was nothing short of amazing. I can't imagine how Dark Knight or Transformers will sound. Because some of the wolf fighting scenes in Twilight rocked the house, everything was shaking. I could "feel" and hear the walls rattle.
So to summarize the PL-200 with just a couple hours of use, I would say this:
If I had to do this over again, I would have just bought 2 PL-200's instead of the Axiom and saved some money. The PL-200 is an incredible value and when cranked up some, will produce test tones down to 20hz and 18hz nicely. The Axiom EP350 just can't do that, and it's more than twice the price. I'll try to report back here when I get some more bass intense movies, plus I need to tweak some more.
As a side note, I'm really thinking about replacing the PL-200 stock amp with the 500 watt Bash amp, just for fun. But believe me, the stock amp rocks! This is more than enough low end thunder that I will ever need. I just can't see investing $1200.00 plus for a high end sub. One of the reasons I went for the PL-200 to begin with was I wanted 2 subs and I can spend the money I saved, on the Velodyne SMS-1 Sub Eq. I should be ordering the SMS-1 in a couple weeks. This will round out my system for awhile.
Below is my gear if anyone is interested: Take care!
52" Samsung HDTV, Axiom M80 fronts, VP100 center, EP350 subwoofer, Samson Surrounds, Pioneer VSX9040 HDMI AVR, Odyssey Khartago Monoblock Extremes,
Xbox 360, Sony PS3

Click Here to see more reviews about: BIC PL-200 Acoustech Platinum Series Subwoofer



Buy Now

Click here for more information about BIC PL-200 Acoustech Platinum Series Subwoofer

Read More...

Onkyo TX-SR876 7.1 Channel Home Theater Receiver (Black) Review

Onkyo TX-SR876 7.1 Channel Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I have had this receiver for several weeks now. I was a little leary about purchasing this unit as it was being used in a room that does "double-duty" of being a place where I listen to high-end analog and digital music along with occasional use of a home-theatre. The primary purpose is music reproduction and I was tempted to go with tube-style amps and other gear in support of my vinyl record collection. But since there are always compromises in this area (space, money, etc) I decided to take a chance with this Onkyo. All I can say is WOW. I run 5.1 channels with bi-amplification on the front speakers (my one concession to music versus video). The sound reproduction is excellent. I have done a lot of comparison shopping and looked at a lot of different systems and I would have had to spend over $4-5K on hybrid tube amps to get sound better than this.
In terms of home theater, it is even better. It performs as advertised. Set-up was a breeze and the audessy is a pleasure to use and instantly "balanced" my room. For home theater use, it is incredible. Ground-shaking lows, booming sound when appropriate yet the most subtle sounds (such as dialogue at a low level) is outstanding. Some reviewers complain about it running hot. I have mine outside of any cabinet (top shelf of a component stand) and have run it for hours at 75-80% of max volume with no problems.
My two complaints are: The remote as the buttons are a bit hard to read in dim light (even with the back-lighting) and it only has 3 digital optical inputs. Given I use seperate CD and DVD players, along with a Laser Disc and other digital sources, I had to use the alternate digital cable connects. Not a big deal, I just expected more digital optical inputs.
In summary, if you are looking for a leading-edge video processing unit that has outastanding home-theater characterstics at a low price, then this is definitely it. Throw in the fact that it processes music far beyond the expectations one would have for solid-state receiver (especially at this price point) and you really have a great unit.
If you do decide to buy this, please note the dimensions and weight. This is a large, heavy receiver. And given the heat concerns of other posters, I would make sure it has plenty of "breathing room".

Click Here to see more reviews about: Onkyo TX-SR876 7.1 Channel Home Theater Receiver (Black)

Based on a winning design for high-definition home theater reproduction, the TX-SR876 is a comprehensive A/V processing "hub" with a deep reservoir of amplification power to draw on. Reveling in its new THX Ultra2 Plus certification, the TX-SR876 shows its class with a broad range of capabilities, phenomenal performance, and noticeable finesse.With its advanced HQV Reon-VX video processing-which enables upscaling to high-def 1080p-and supreme high-definition surround sound decoding, this receiver belongs in elite company. It's also one of the first receivers anywhere to employ ISF (Imaging Science Foundation) video calibration. From whatever movie, music, broadcast, or gaming source you choose, the TX-SR876 will impress time and time again.

Buy NowGet 20% OFF

Click here for more information about Onkyo TX-SR876 7.1 Channel Home Theater Receiver (Black)

Read More...

Onkyo TX-SR607 7.2-Channel A/V Surround Home Theater Receiver (Black) Review

Onkyo TX-SR607 7.2-Channel A/V Surround Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
My previous receiver was a 9 year old Sherwood. It was a little above a low end unit. It started buzzing and I decided it was time for a replacement. I have 2 nice Wharfdale floor speakers, a nice center, decent rear surrounds and 2 really decent sub woofers.
I read extensive reviews on several brands and decided that I would purchas Onkyo. I went to Fry's looking for the 606 model. They were sold out and just received the 607. I purchased the 607.
I wanted something HDMI based that allowed audio through the HDMI cables. The thing was a snap to set up. Make sure to run an HDMI cable to your TV from the receiver so that you can do on screen programming.
As I said, I have 2 sub woofers and the 607 has two output RCA jacks to enable 2 subs. No more RCA splitters. I fired the thing up and was shocked at the sound quality. The thing sparkles and the lows are clean and deep. I adjusted the individual speaker levels with a Radio Shack db meter on an easy to use Onkyo menu. I did not use the calibration system built into the receiver. A few trips through the menus and you have them mastered. The menu system is REALLY SIMPLE.
Unless you have some REALLY expensive speakers, this is the unit for you. Great sound quality, simple setup and easy menus make this a good choice for the novice or mid range home theater enthusiast.
I highly recommend the unit.

Click Here to see more reviews about: Onkyo TX-SR607 7.2-Channel A/V Surround Home Theater Receiver (Black)

The TX-SR607 raises the bar once again in the competitive world of mid-range home theater. With HDMI 1.3a inputs for up to six components, it's ready to handle all your high-definition video and audio needs. Whether it's a Blu-ray Disc player, a cable or satellite box, or a gaming console, your video signals will be traveling first class. Lower-resolution analog video signals, meanwhile, can be upscaled to 1080i and fine-tuned by Faroudja DCDi Edge™. HDMI version 1.3a also transports the master-quality HD audio formats, DTS-HD Master Audio™ and Dolby TrueHD. The very latest Dolby technology, Dolby Pro Logic IIz, enhances the spatial sensation

Buy Now

Click here for more information about Onkyo TX-SR607 7.2-Channel A/V Surround Home Theater Receiver (Black)

Read More...

Onkyo HT-RC180 7.2-Channel A/V Surround Home Network Receiver (Black) Review

Onkyo HT-RC180 7.2-Channel A/V Surround Home Network Receiver (Black)
Average Reviews:

(More customer reviews)
I've owned a lot of electronics, all makes and many models. I had not upgraded my core system for many years, and knew it was time for a change. I'm a fan of Onkyo (I have another Onkyo AV receiver in the living room) and was looking for one with network connection and more power. Man does this deliver. The quality, feel and look is all top-quality. This may be a 7.1 system, but it powers 10 speakers, two subs, and three different zones/rooms! That's 11 speakers plus two subs (13 total.) Remember that Frasier episode from a few years ago where he purchased a new soundsystem, and his living room looked like a speaker Stonehenge. Seemed farfetched at the time - but now it's clearly possible. If you use full sized speakers you would have a draw-dropping first impression. As it is, I have 11 speakers and one sub, varying sizes and makes - that's impressive enough.
The sound? Wow. I played Aero by Jean Michelle Jarre - a 5.1 audio DVD. It knocked my socks off. The audio resolution and depth were amazing. The receiver also has numerous listening modes - so many it takes over two pages in the manual to list them. Different Dolby modes, THX and many more. There's a diagram on the front panel that displays the speakers that will be used by each mode. As you change them, the speaker display changes - pretty simple. Want only two speakers? Four? Eleven? Simple.
So here's my experience, from unpacking to turn-on.
Packaging: Extra-heavy duty. Double-thick box, form fit foam. The box will take a lot of abuse in shipping. See my included photos.
Unpacking: Typical anti-static and foam wrap, tape and scratch protection. Heavy unit - will take two people to unpack unless you are comfortable moving heavy weight.
Installation: I find it easier to make a temporary platform at around the same height as the shelf the unit will sit on - I've always done this. In this case, two storage boxes put it at about the perfect height. This way I can attach all cables and simply slide the unit in place. When we're talking this many wires it's a big help. The RC180 includes a manual (thick!), quick start (handy!) and a sheet of decals to mark your speaker cables. At first I thought - "yes, like I'll need these!" Man did they come in handy! The labels were a real timesaver. Again, see the photos.
My BluRay player uses a network connection, and so does this unit. I had a single network cable in the room, so had to add a hub to split the connection. I can't use wireless in the home - it's an older building, lath/plaster/steel mesh. It works like a Faraday cage, and kills signals. The RC1800 uses a wired connection anyway, as does my BluRay player. If you already have a wired connection in the room, keep in mind you may need a hub to add more outlets.
It took around an hour to hook everything up, from unpacking to sliding the unit in place.
BEFORE I put the unit in place, I ran the speaker test. This allows you to verify correct placement. Again, it came in handy. I had the upper left front and upper right front speaker connections swapped (there are SEVEN speakers in front - Two Upper front, Two front, Two wide front, and one center!) Fixed that, then slid the unit in place.
Turned it on again, verified all the AV connections. You can customize pretty much all the connections. For example, I have my DVD set to use component in 1 and digital audio coax in 2. My VCR (yes, I still have a VCR) uses the VCR input, and I have the TV set to use optical in 2. This allows a lot of customization and personalization. Next I named all the inputs, so the display shows whatever text I want.
Then I ran the Audyssey setup. I love this system. My other Onkyo uses it as well, and it's great. The RC180 uses a more advanced version. It tests the standard three listening positions, and has an additional optional three positions for more fine tuning. I only needed three. This took around 15 minutes to run. It tests every speaker, including the subwoofer, then writes the data.
Next I customized the remote control. It's a universal remote with some cool options. There are programmable shortcut buttons (my music, my movies, etc.) as well as the standard controls for all your devices. It's interactive - you follow on-screen prompts (it uses your TV for the display.) Basically you enter the first three letters of your make, perform a search and select the make from an amazingly comprehensive list. You also select the category of the device - VCR, DVD, etc. You then go through a train and error selection process of codes. You're instructed step by step. My DVD took three tries for the correct codes. The BlyRay and VCR did it in one. After you are finished with that, you can program the shortcut buttons (My Movies, etc.) With one button press it will turn on selected devices, press play, etc.) Works perfectly. I press MyMovie and the TV turns on, the Onkyo turns on, the BluRay turns on and plays.
My only gripe is the net connectivity - the remote control takes a lot of getting used to, as the functions for net use are counterintuitive. The unit has built in support for several web based radio services. One of the included services, vTuner, is free. The others require a subscription (Sirus, Pandora, Rhapsody.) The instructions for vTuner setup were problematical. You're instructed to go to a URL and use the unit's MAC address to register. vRadio won't accept the MAC address - they want a unit ID. The vRadio instructions for finding the unit ID are not even close. Basically the Unit ID and Mac address are the same thing, but vTuner won't take it. Still fighting that. You can use vTuner without it, but you won't have favorites, playlists, etc.
Update: Figured it out. They do indeed want the MAC address - however, without any spaces, dashes, colons. Just the letters and numbers as one long string. Find the MAC address under the network setup - ignore the instructions from vTuner.
Streaming from your computer? The RC180 automatically detects the computers on your network with media servers running. I have three PC's running Windows media player - it found all three of them. I'll add more details on in-house media streaming in the future - I need some more hands-on to make an honest evaluation. My main PC is based on Windows 7. The instructions for connecting to the media player are for Media Player 11 (Vista / XP), not Windows 7. Windows 7 uses Media Player 12 - so you need to use the DLNA instructions, not the Windows Media Player instructions. One big mistake I made was attempting to connect to my computer before allowing access to the Onkyo. This stuck the Onkyo in a loop while it kept trying to connect. Eventually it gave up and I was able to get it all to work. You really need to create playlists to make it easy to use.
From what I see so far, I can't use my iTunes library. The Onkyo requires DLNA compliance, and iTunes is not - that's why you can't use iTunes with many devices over a network, including the PS3.
Followup: I can't stress how important a great center speaker is. I had an anemic speaker with a 4" woofer. It was basically a spare JBL studio speaker - great quality, but it was rated at 50 watts. I replaced it with a BIC center speaker that has two 6" woofers and a large horn - and handles 175 watts ( BIC America DV-62CLRS 6-Inch 2-Way Center Channel Speaker ). Wow! What a difference. With the old speaker, the Onkyo would not go past 70% volume - the Audyssey setup detected that feeble little speaker and limited the maximum output. Really annoying, since the rest of the speakers were pretty decent, but any more volume and that speaker would have been so much scrap. The center is mainly used for voice, but don't overlook it! Now I can crank to 100%!
More followup: It detects and streams audio from my Iomega StorCenter Pro ix4-200d 2 NAS (A network storage devide.)

Click Here to see more reviews about: Onkyo HT-RC180 7.2-Channel A/V Surround Home Network Receiver (Black)

The THXSelect2 Plus Certified HT-RC180 combines the latest home-theater functionality with home-network capability to create a compelling mid-range centerpiece. A rear-side Ethernet port enables the HT-RC180 either to receive and output audio tracks playing on your PC, or to bypass your PC and directly stream internet radio stations such as Rhapsody and Pandora. The HT-RC180 provides five HDMI1.3a inputs to handle a range of high-definition video and audio sources. HDMI compatibility also enables the receiver to upscale any video input to 1080p via Faroudja DCDi Cinema. This 110 W-rated receiver also features Audyssey DSXand DolbyPro LogicIIz, two new surround-sound formats that expand the spatial dimensionality of games and movies. On top of all this, you also have Audyssey room-correction and equalization technologies working to create a well-balanced soundstage, no matter the volume level or the shape of your room. Among the other highlights of the HT-RC180 are a customizable remote controller and a proprietary Universal Port that enables single-cable connection of peripheral audio devices.

Buy NowGet 26% OFF

Click here for more information about Onkyo HT-RC180 7.2-Channel A/V Surround Home Network Receiver (Black)

Read More...

Yamaha RX-V659BL 7.1 Channel Digital Home Theater Receiver (Black) Review

Yamaha RX-V659BL 7.1 Channel Digital Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I am an A/V novice, and this is how/why I bought this receiver:
I originally bought it while looking for a 6.1 receiver in the $400.00 range. Best B** had a Pioneer that was THX certified for about $475. I had them put a rain check on it, then went to another store to listen to what they had (Best B** has a new policy of 'upselling' by sending any customer who is interested in mid-level audio to a 'specialist' who wants to unload Denon etc. - usually in the Home Theatre room. This annoyed me mightily, as I didn't even get a chance to listen to the Pioneer.)
At the other store, I listened to the 6.1 Yamaha HTR-5850 and was happy with that. My wife pointed out that the 7.1 RX-V659 was only about $50.00 more, and wondered what the difference was. We gave it a listen and were pleased. My wife listened to a Luther Vandross CD, and I listened to a classical music CD, then we popped in a copy of The Matrix DVD (you know what scene). My main concerns were HDTV compatability (has 3 component video inputs) and the RX-V659's audio/video auto upgrade feature. As neither me nor my wife have an iPod, we didn't care about the docking station capability of it, but it is a pleasant upgrade for later. We bought it for quite a bit less than what is listed on the Yamaha website, and less than the Pioneer receiver at BB.
I hooked the receiver to a Bic America Venturi bookshelf pair as front ends, then went with the Yamaha NS-SP1600 5.1 HTIB set-up (yes, it's their low end model, but I listened to them and they sounded fine for our 20'x30' room with nine foot ceiling.) I replaced that Yamaha HTIB center speaker with a KLH 525 II Platinum-II 125-Watt center speaker. I bought a roll of 12 gauge speaker wire - avoided the Monster stuff - went with Lowe's. The CD's and movies sounded great already, but there's more to this: the front speakers still have to 'break in' and only recently did I discover what the Neural Surround Sound exhibits when pumping XM satellite radio through them. WOW! Incredible separation! Our little room now has an audio sweet spot that allows me to consider never going out to the movies again. I've spent hours going through the different sound fields, and continue to come back to Neural Surround. Also , listening with headphones is wonderful with the Night Listening Enhancer - listening to TV with headphones never sounded this good for me. Set-up was breeze - the YPA sound optimizing thing takes some getting used to, but I like that the menus are on your TV's screen, not the face on the receiver unit.
Now I 'have' to get a new DVD/CD player that has DTS output. If this receiver lasts for at least a decade, Yamaha has a fan for life...
Unfortunately, this receiver is not HDMI-ready, but that might not be a gripe if/when I get a new HDTV and can run the video line directly into the TV instead of the receiver. Otherwise, this is a 5 star review.

Click Here to see more reviews about: Yamaha RX-V659BL 7.1 Channel Digital Home Theater Receiver (Black)



Buy Now

Click here for more information about Yamaha RX-V659BL 7.1 Channel Digital Home Theater Receiver (Black)

Read More...

Yamaha RX-V3900BL 7.1-Channel Network Home Theater Receiver (Black) Review

Yamaha RX-V3900BL 7.1-Channel Network Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I purchased this unit a week after it went on sale. I had been investigating the device for some time prior to the actual release. I used this to replace a Yamahe DSP-A1 purchased about 10 years ago. I wanted to simplify my cabling by switching to an HDMI capable receiver. The availability of 4 HDMI inputs was a big selling point for me.
After initial setup I put the unit through it's paces with SACD recordings of Elton John's Madman Across the Water and the Alman Brothers Eat a Peach. The SACD 5.1 sound from my PS/3 over the HMDI was exceptional, wonderful depth to the soundfield. The video upscaling in this unit is far superior to that included in my 50" LG Flat Panel and has made watching non-HD signals much more palatable. Using blu-ray DTS HD and DD Pure HD both sound amazing. I also purchased a Rhapsody subscription account to use with the unit and love the virtual library of hundreds of thousands of CDs at my fingertips through the remote. I have found several albums on Rhapsody that result in a "unable to play" error, I am not sure if they are encoded in a format other than MP3 or if this error also occurs when using Rhapsody on a PC, these were usually extremely obscure recordings.
The onscreen Ipod controls are great and the album cover display is a great addition, now if they could only get the album, flip view from the iPhone or iPod touch working for scanning through and selecting albums/songs that would be truly fabulous.
The lack of inclusion of wireless networking is a big mistake in my view, how many people would have their ISP drop right next to their stereo system? I overcame this easily with the purchase of a "Wireless Gaming Adapter" which attaches to the Ethernet port on the receiver and connects it to my wireless network, this solution has worked well and runs about 50-100 dollars.
My biggest concern with the unit has been the adaptive sound leveling. This is a great feature to make sure you don't get blasted out of the room when commercials come on at twice the volume of your show. Usually this feature mutes the sound and makes the adjustment very quickly but every now and then it has difficulty setting the volume accordingly and drops the audio for as much as 10-20 seconds, very annoying when using DVR functions to skip commercials then having to go back 2-3 times to get the audio enabled again at the end of the commercials. Once the unit could not seem to set the audio at all and it required selecting a different source before sound was enabled again.
Overall I am quite happy with the unit and hope that a software/firmware upgrade may alleviate the audio level drop issues at some point in the future, while sometimes annoying this issue comes nowhere close to outweighing the great benefits of this receiver.
Pros:
Exceptional sound quality
Great video upscaling
Extensive features listing
Amazing array of device connections
Cons:
Not in everyones pricing range
Initial configuration not for the inexperienced
No built-in wireless networking (could have been a design decision to reduce potential degration of the audio signal)
Infrequent extended audio drop outs when relevelling the audio between programing and commercials or when changing stations
Some CDs visible through Rhapdosy cannot be played

Click Here to see more reviews about: Yamaha RX-V3900BL 7.1-Channel Network Home Theater Receiver (Black)

Yamaha's next generation 7.1-channel Network AV receiver offers unsurpassed versatility, access to today's most popular music sources including Internet Radio, Rhapsody online music service, music streaming from PC, HD Radio with iTunes tagging, XM and SIRIUS Satellite Radio ready, USB, iPod and Bluetooth compatibility, as well as extensive multi-zone custom installation and convenience features, plus a Web Browser Control.

Buy NowGet 12% OFF

Click here for more information about Yamaha RX-V3900BL 7.1-Channel Network Home Theater Receiver (Black)

Read More...

JVC RXD702B 7.1 Channel Surround Sound AM/FM Audio Video Receiver with HDMI Switching and Wireless PC Link Review

JVC RXD702B 7.1 Channel Surround Sound AM/FM Audio Video Receiver with HDMI Switching and Wireless PC Link
Average Reviews:

(More customer reviews)
Having recently upgraded my home theatre system I needed a multi-channel audio video receiver that would supply multiple input control and functionality in a relatively compact space. I wanted a receiver that would provide HDMI switching and be capable of powering large, wide range speakers. The JVC turned out to be ideal on both counts due to it's low profile yet ample power reserve allowing easy placement in my rather limited widescreen tv support shelf.
Although my HDMI DVD player interfaced beautifully, my cable service provided DVR didn't like the JVC's HDMI input and refused to pass hi-def material through the receiver. This necessitated using the DVR's and receiver's component outputs and inputs respectively. A call to my cable provider confirmed the DVR box's bad behavior and I was told I would have to wait for the providor's next upgrade. The good news is that I wasn't able to discern any significant loss of detail in hi-def material on a 1080P capable 73" widescreen DLP tv by using the component video and optical audio outputs. Your results may differ.
One feature of the JVC that I found particularly useful was it's built-in wireless USB audio streaming function. Installing the provided small antenna on the receiver and plugging in the transmitter to my desktop computer located in a different room was a snap. Now I can easily stream high quality music (uncompressed) and internet radio stations from my computer through my home theatre audio system. One caveat to be aware of is that like wireless internet, the provided USB wireless transmitter is affected by 2.4GHz home telephone systems and, believe it or not, some microwave ovens. If you have a 5.8GHz phone system you'll be fine. Wish I could say the same about the microwave.
While relatively easy to install, the JVC setup procedure requires considerable review of the comprehensive manual. I found that I had to jump around the instruction manual quite a bit before I was able to use the receiver effectively. The on screen guides are easy to follow although one has to drill through multiple menues.
The provided remote control works very well and features a retractable cover that allows one to access less used functions easily while simultaneously keeping the device uncluttered. The instructions on how to add additional external devices were very straightforward and worked flawlessly.
If you're in the market for an excellent sounding HDMI capable multi-channel AV receiver with reasonable funtionality and a relatively small footprint than I encourage you to consider this JVC receiver.

Click Here to see more reviews about: JVC RXD702B 7.1 Channel Surround Sound AM/FM Audio Video Receiver with HDMI Switching and Wireless PC Link



Buy Now

Click here for more information about JVC RXD702B 7.1 Channel Surround Sound AM/FM Audio Video Receiver with HDMI Switching and Wireless PC Link

Read More...