Showing posts with label component receivers. Show all posts
Showing posts with label component receivers. Show all posts

Denon AVR-789 630-Watt 7.1 Channel Home Theater Receiver Review

Denon AVR-789 630-Watt 7.1 Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I've done tons of research on a receiver in this price range. I can tell you that this unit is the best for the money. I've research the yammy 663, onkyo 606, and the 789/1909. The 789 and the 1909 are the same unit just made for different retailers. The four digit receivers from denon are for local retailers and the 789 is manufactured for higher volume retailers like BB or CC. I tried two 606s before spending the extra $150 on this model. The first 606 i had suffered from the humm/buzz problem that's all over the avsforum. The second unit i had dropped the video signal after a couple minutes of switching sources or powering the unit on and off. So i went with the 789 and couldn't be happier. My new 7.1 sounds amazing and the Audessey features are the best. i wouldn't attempt to set up a 7.1 with out it. The remote kinda sucks, but i got a Harmony 890, so all remotes go into storage anyway. I have it hooked up to a ps3, 360, comcast cable box, denon dvd, vcr, and ipod. All the SD signals get pushed to 1080p. The upscaling is so much better than the 606 it's not even funny. i would recommend anyone looking for a hdmi receiver that upscales to get this model.

Click Here to see more reviews about: Denon AVR-789 630-Watt 7.1 Channel Home Theater Receiver

Equipped with the latest video and audio processing functions, the AVR-789 brings high performance surround sound and extensive video flexibility at a truly affordable price. For the ultimate audio experience, the AVR-789 features Dolby TrueHD and DTS-HD Master Audio decoding to handle the explosive soundtracks found on many of today's advanced Blu-ray high definition discs, along with Dolby Digital Plus and DTS ES 6.1 surround decoding functions. The video section includes Faroudja's renowned DCDi processing and upconversion to provide near-HD picture quality from conventional sources such as cable, satellite and DVD, while at the same time providing a single video output connection to your HDTV. In addition, the video section features the latest specification HDMI v1.3a signal handling, with three inputs capable of handling Dolby TrueHD and DTS-HD Master Audio soundtracks as well as uncompressed LPCM multi-channel sources. Setup and operation are a snap, aided by Denon's enhanced icon-based on screen display that also features a screen saver. To eliminate jarring shifts in volume between TV shows and commercials, the AVR-789 features Audyssey Dynamic Volume automatic volume-leveling system, as well as Audyssey Dynamic EQ to ensure rich bass and smooth tonal balance, even at low volume levels. Audyssey MultEQ in-room acoustic optimization and enhanced multimedia connectivity are just a few of the many additional advanced features that the AVR-789 offers.

Buy Now

Click here for more information about Denon AVR-789 630-Watt 7.1 Channel Home Theater Receiver

Read More...

Yamaha RX-797 Audio/Video Receiver Review

Yamaha RX-797 Audio/Video Receiver
Average Reviews:

(More customer reviews)
This is an excellent 2-channel Stereo Receiver, for several reasons. Let me explain why I chose this brand/model over others and how I came to it. If you are in the market for Stereo Receiver, it may be useful for you.
A few months ago, I was listening to a jazz CD on my cheap ($200) Sony Home-Theater-In-A-Box and noticed that the sound was noticeably tighter than when I listened to it on my much more expensive, but significantly older stereo system. My old stereo system was purchased as separate components in 1993. It consisted of Sony STR-D990 Receiver ($400), single-disc Sony CDP-211 CD player ($100) and pair of Advent Baby II speakers ($250). Mind you, each of these components work and sound as good today as they did 15 years ago at the time of purchase (kudos to Sony for that), but I suppose I'm getting a little pickier now that I'm in my 30s. Music plays a MUCH larger role in my life than movies or television does (hence the cheap Home Theater set-up), so I decided I needed to upgrade.
PRIORITIES: 1) SPEAKERS--> 2) RECEIVER--> 3) CD PLAYER --> 4) CABLING/INTERCONNECTS
I decided that speakers were most important and thus the place to begin. After reading several reviews, I decided that Polk Audio Rti6s might be a good choice. I went to a retail store to listen to them and they sounded really good, but then the sales associate let me listen to the Polk Audio Lsi9s. Whew! They just blew me away. I had never heard anything like them. While the Rti6s run for $270, the Lsi9s are $900, but well worth it for that price, as a long-term investment (Polks come with a 5-year warranty). But I noticed that these run at 4 ohms and need a low-impedance amplifier/receiver, that is, one equipped with so-called "high current amplification," to drive them. Well, my old Sony did not have this function (it could take only 8-0hm current speakers). So, I looked all around for a receiver that could fit the bill and the Yamaha RX line became the obvious choice, after reading positive review after positive review. Since the Lsi9s can handle 200 watts per channel, I chose the RX-797 because while it has a power rating of 100 watts per channel at 8 ohms, it allows one to use two 4-ohm speakers and when doing so there is a power boost. Customer representatives from various retailers couldn't give me an exact watt rating (because Yamaha does not conduct tests at with 4-ohm speakers), but the general concensus was that it would increase to about 140 watts per channel with 4-ohm speakers. (I just didn't want to shortchange my speakers). I also chose this receiver because of the extremely low Total Harmonic Distortion (THD) rating of .019% as well as the Pure Direct and CD Direct modes for the lowest possible distortion. (Compare these features to say Onxyo and Harmon Kardon A/V receivers in this range and you'll see that the advantage lay with Yamaha).
When the RX-797 arrived, it not only lived up to but exceeded my expectations. Paired with the Lsi9s, I can hear a much, much crisper separation of instruments, and this is especially nice for my digitally remastered jazz CDs. I live in an apartment complex now and never have the need to turn the volume beyond the 9 o'clock position. I have gone up to 11 o'clock for testing (when I knew my neighbors weren't in!) and, as expected with these ratings, I couldn't hear any distortion whatsoever. (I can't wait until I move into a house for a larger sound stage). Other pluses: The knobs and controls have a nice solid feel and look great. It picks up many more FM radio stations than my old receiver, and the reception is noticeably cleaner. The remote is simple and sensible (just how a remote should be). My only gripe is that one cannot program CD players made by other manufacturers with this remote, but perhaps thats standard practice. This has other nice features such as being XM Satellite Radio Ready and dual room/dual source for those who are interested, but the main selling points for me were the 4-ohm capability, the wattage rating and the extremely low distortion. The fine looks and sensible controls/display and remote are icing on the cake.
I found one from an authorized dealer by a fluke for $350, but certainly would have been willing to pay the full $499. If you see one for less than $450, be sure to first confirm with the seller (or better yet Yamaha) that they are indeed an authorized dealer; otherwise your two-year warranty won't be honored if you run into problems (not that I'm expecting to).
In sum, if you are looking for a receiver with ample, clean power, extremely low distortion, the abilitiy to drive 4-, 6- or 8-ohm loads, excellent FM reception, and easy to use and well laid-out functions for 2 channel (as opposed to Home Theater) listening, I don't believe you can do better for under $600 than Yamaha's RX-797 receiver.

Click Here to see more reviews about: Yamaha RX-797 Audio/Video Receiver



Buy Now

Click here for more information about Yamaha RX-797 Audio/Video Receiver

Read More...

Onkyo TX-SR308 5.1-Channel Home Theater Receiver (Black) Review

Onkyo TX-SR308 5.1-Channel Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
This is what Onkyo does best. This thing offers great performance. It is rock solid, no nonsense, just what you need and not much else. What it does, it does very well: decode most everything, and HDMI 1.4!!!
I was surprised how similar this unit was to my old 2006 model Onkyo 5.1 reciever. This model is clearly a new generation of the same line, with many features and design choices being identical. What sets this unit apart from those of yesterday is the connectivity. 3 HDMI 1.4 inputs, full 3D compatibility for down the road, two optical inputs, composite inputs, and more.
What is not so hot are the "frills". I say "frills" because they are not so frilly. The alternate listening modes are mostly useless- just like they were 5 years ago. The on unit display looks very, very dated, and the remote is even worse than before. In fact, the display and listening modes are identical to my old unit. After setup, dont expect to be pressing more than about 4 buttons on the full-sized remote unless you have other Onkyo components- this remote is NOT universal. This unit does support some "control via HDMI" functionality, so depending on your TV you may be able to sync them to some degree and use one remote for most casual functions on both devices. It also does not upconvert lesser video inputs to HDMI, which is nice to have, but nobody really does that very well until you get into the much higher price points anyway.
But who really buys one of these for a remote and boring sound effects? Not me. I bought this for one reason only: Onkyo quality sound. And this unit does not disappoint. Aside from just sounding great, the functional aspects of this unit are absolutely rock solid and do exactly what you would expect from Onkyo. For the money, I dont know how you could beat this unit. You get Onkyo's top notch, no nonsense audio performance and everything that comes along with HDMI 1.4. Auto a/v sync is here as is deep color if your TV and other components support them. You will be ready if 3D really takes off, or if the reasonably priced HDTV's keep getting much better within the next 3-5 years. This budget unit can grow with your home theater as the industry evolves over the next few years, and keep sounding great the whole time- which is big plus considering where we are in the technology cycle. Onkyo really got it right this year with this model at this price point.
I fully recommend this unit to anyone looking for solid 5.1 surround at this price point that they dont want to throw away in 2 years.

Click Here to see more reviews about: Onkyo TX-SR308 5.1-Channel Home Theater Receiver (Black)

At the budget-conscious end of the home entertainment spectrum, you're looking to maximize performance and features without putting undue strain on your finances. At Onkyo, we get it. That's why we've redefined the entry-level A/V receiver once more, with the high-value TX-SR308. Not only is it ready for the 3D video future-thanks to its HDMI 1.4 specification-but it also handles high-definition lossless audio codecs from Dolby and DTS. Advanced A/V processing on a bedrock of classic Onkyo engineering is complemented by a bevy of convenient features: a new overlaid On-Screen Display for easy adjustment of settings; a Universal Port for single-cable connection of peripherals; and a front-panel audio input for direct connection of iPods and other MP3 players. With the TX-SR308, you get a home theater centerpiece ready to drive the latest high-def entertainment sources, today and beyond.

Buy Now

Click here for more information about Onkyo TX-SR308 5.1-Channel Home Theater Receiver (Black)

Read More...

Harman Kardon AVR7550HD 7.2 Channel Audio/Video Receiver Review

Harman Kardon AVR7550HD 7.2 Channel Audio/Video Receiver
Average Reviews:

(More customer reviews)
I have been a HK fan for years. My last HK product was the DPR2005. I had great luck with it and really enjoyed it until I went with HDMI hookups in my home theater and it had none. A high end pro-audio store along with a number of reviews for current HK product lines convinced me to try another brand. After trying in my home Denon, Sony, Onkyo, Marantz I finally settled on Marantz. The sound that I was used to just wasn't there but it was fine. I suspected that the difference was the digital path receiver. I replaced every speaker in my 7.2 surround system to try to capture the sound I like and was moderately satisfied with the sound when I was done. Just recently I decided to try to give the HK AVR 7550HD a try since it was closeout priced and not a big risk. I was wrong, the sound I missed is in the HK products and not in the others. This receiver is extraordinary! For anyone that has the opportunity to buy one why they are still left I suggest they do so. Just a word to the wise though, I would, as with any quality electronic device use a good power conditioner to protect it. I believe that most problems encountered with electronics today are power variation related and not the fault of the devices whatsoever. I spent thousand replacing speakers that were completely unneeded, had I just purchased the Harman Kardon devices that I have come to enjoy so much since I bought my first HK seperates in the 70's

Click Here to see more reviews about: Harman Kardon AVR7550HD 7.2 Channel Audio/Video Receiver

7x 110W 7.2-Channel A/V receiver with HDMI V1.3a repeater, audio/video processing and upscaling to 1080p, Harman Kardon A/V receivers are renowned for their power, performance and ease of use, and the AVR 7550HD will only enhance that reputation. Among the fi rst receivers to offer Dolby Volume technology, which automatically adjusts volume levels when switching between sources and channels, the AVR 7550HD delivers 110 watts of power to each of the seven channels, plus two subwoofer outputs. It accepts a universe of inputs, including HDMI, component, S-video, USB and broadband Internet, as well as The Bridge II docking station (included) for iPod A/V playback, control and charging. Every Dolby and DTS technology is here, as is Faroudja DCDi Cinema and our exclusive Logic 7 processing. Zone II remote, Zone II OSD and A-BUS technologies work together to greatly simplify multiroom A/V applications. And the EzSet/EQ II system fi ne-tunes system performance to the acoustic needs of your space in justa few easy steps.

Buy NowGet 53% OFF

Click here for more information about Harman Kardon AVR7550HD 7.2 Channel Audio/Video Receiver

Read More...

Denon AVR-1911 7.1 Channel A/V Home Theater Multi-Source / Multi-Zone Receiver with HDMI 1.4a supporting 1080p and 3D (Black) Review

Denon AVR-1911 7.1 Channel A/V Home Theater Multi-Source / Multi-Zone Receiver with HDMI 1.4a supporting 1080p and 3D (Black)
Average Reviews:

(More customer reviews)
Note - This review is for the nearly identical Denon AVR-791
There are three $500 receivers to consider, if you're buying one in 2010 - Onkyo TX-SR608, Pioneer VSX-1020-K and this one. All three feature the latest HDMI 1.4, which is necessary for 3D signals. Here's how they compare:
-The Onkyo is the most powerful in terms of real world performance, followed by the Denon and finally the Pioneer. All three perform at par for normal listening volumes, but the Onkyo can handle very high volumes the best, while the Pioneer runs out of breath
-The Denon has Audyssey Multi-Eq, which automatically calibrates the receiver for use in your room (a mic is provided). The Onkyo has a similar but less versatile Audyssey 2EQ. Pioneer has its own system called MCACC which also works well, but Audyssey may be slightly better.
-All three can upconvert analog sources via HDMI - hence you'll only need one HDMI cable to connect to the TV. The 1.4 spec supports an audio return channel, so the TV's sound can be output to the receiver without extra cables. The Pioneer and Denon use the excellent Anchor Bay chipset, while the Onkyo uses the slightly inferior Faroudja DCDi chipset for video processing.
-The Pioneer and the Denon have a front USB input where you can connect your iPod (or iPhone) directly. You can browse playlists etc using the receiver's remote via the onscreen display. Since this is a digital connection, the sound quality is excellent - while the iPod can be connected to the Onkyo via an analog cable, it does not sound as good and cannot be navigated using the remote.
-The Denon offers an equal variety of inputs as the other two, but has fewer of them - eg, one optical input vs 2 for Pioneer and Onkyo
- The Pioneer's iPhone app is just a gimmick and of limited utility - I would prefer using the main remote.
Overall, I decided to purchase the Denon since it has Audyssey MultiEQ and adequate power (unlike the Pioneer) as well as excellent video processing and iPod connectivity (unlike the Onkyo). I have been using it for about a week and am very pleased with the level of performance offered.Update on December 3, 2010: The receiver continues to perform well and I have no new complaints. However, I have noticed that both Pioneer VSX-1120-K and Onkyo TX-NR708 are available for ~$500, while discounts on this and other Denon receivers are marginal (here on Amazon). Hence, both those higher spec'd receivers now represent better value than the AVR-791/1911, if you're looking to spend ~$500 on a receiver. Also, the Onkyo TX-SR608 and Pioneer VSX-1020-K are now available for ~$350 and hence have become more compelling alternatives to this receiver.

Click Here to see more reviews about: Denon AVR-1911 7.1 Channel A/V Home Theater Multi-Source / Multi-Zone Receiver with HDMI 1.4a supporting 1080p and 3D (Black)

The new AVR-1911 is packed with technology and features making it the clear choice for value oriented consumers looking for exceptional performance. Each of its 7-amplifier channels produce 90-watts of power, delivering detail and dynamics to music and movie soundtracks. They can be configured for 7.1 channel surround sound, or drive a 5.1 channel system in the main room and power a pair of speakers in a second 'zone". It's equipped with 1080p and 3D (all formats) compatible HDMI 1.4a Repeating technology, delivering both audio and video to your HDTV with single HDMI cable. This HDMI connectivity supports the latest generation surround sound formats available on Blu-ray disc, including Dolby TrueHD and DD+, dts-HD and dts-HR. Also included is Dolby Laboratories new Pro Logic IIz Matrix decoding featuring front height effects channels that expands front soundstage. The AVR-1911 boasts a number of Audyssey technologies. Advanced Audyssey MultEQ analyzes a speaker systems interaction with the listening room at up to six measurement points (microphone included), and then automatically corrects the response to optimize clarity and tonal balance. Audyssey Dynamic Volume is an automatic volume-leveling system that tracks audio dynamics to eliminate the irritating volume swings between TV shows and commercials. Audyssey Dynamic EQ is also on board to ensure rich bass and smooth tonal balance at low volume listening levels.

Buy NowGet 22% OFF

Click here for more information about Denon AVR-1911 7.1 Channel A/V Home Theater Multi-Source / Multi-Zone Receiver with HDMI 1.4a supporting 1080p and 3D (Black)

Read More...

Yamaha R-S700BL Stereo Home Theater Receiver (Black) Review

Yamaha R-S700BL Stereo Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
Writing this review after using this product for about three months. In this era of HT receivers, stereo amps/receivers have become rare species. Point blank HT receivers are not for music. The Yamaha R-S700 is truly an outstanding stereo receiver. Yamaha's power ratings have always been extremely modest. The R-S700 does not sound like a 100W/channel receiver. Like the retro knobs!!....although they are made of plastic and not metal like in the amps from the 80s. Overall it looks tough and crude and thats exactly why I like the looks so much..........reminds me of the amps from the 80s.
I also looked at integrated amps/stereo receivers from Harman Kardon, Denon, Marantz, NAD. Also, I was looking for something with at least 100Ws/channel. Harman's HK3490 and Denon's DRA-697CI scored way low on THD.....too high for my liking:( NADC375BEE, NADM2, NADM3 (unbelieveably low THDs!!!!)are beyond my means at this time. Marantz-PM11S2 has a THD of 0.01% as opposed to Yamaha R-S700's 0.02% ....i.e., pretty much the same. The Marantz however costs $4000!!!!!. So this Yamaha was the only choice. Using Yamaha's CDC600 CD player with Burr Brown 192kHz/24-bit DAC. Because of this DAC, this CD player pumps crystal clear sound to the receiver. So this CD player and the receiver make quite a pair:D! I am using Yamaha NS777 as my towers and JBL ES250P is my sub. Overall, this makes a pretty good system if not outstanding. The price at which this receiver (with such low THD) is currently selling for on Amazon is IMHO very very reasonable. If you have the means go for NAD otherwise get this baby. I am happy with it. Thanks for reading.

Click Here to see more reviews about: Yamaha R-S700BL Stereo Home Theater Receiver (Black)

The Yamaha R-S700BL Stereo Home Theater Receiver redefines the elite two-channel receiver with 100 watts per channel of pure, clean power, ToP-ART stability, Continuously Variable Loudness Control, 40 AM/FM station presets, Zone 2 support, built-in port for supported Yamaha iPod docks (sold separately), and automatic power management.

Buy NowGet 9% OFF

Click here for more information about Yamaha R-S700BL Stereo Home Theater Receiver (Black)

Read More...

Pioneer VSX-1120-K 7.1 Home Theater Receiver Review

Pioneer VSX-1120-K 7.1 Home Theater Receiver
Average Reviews:

(More customer reviews)
Despite the rather disappointing announcement of their departure from the Plasma arena and the de facto departure from in-house blu ray players, Pioneer appears to have made a bold move into the highly competitive mid-range receiver market. Denon and Onkyo have released fiercely competitive models in the $700 price-range that couple either excellent video processing, streamed media, and ample connectivity. My recent review of the Denon AVR891 confirmed their continued competitive product line, but I did lament it lacked some of the swiss army knife approach sometimes imperfectly utilized by Onkyo (the 891 lacks internet-streaming, surround wide processing, and basic rear-panel connectivity). That said, Denon's use of the ABT chipset (begun last year with the ABT-2010 and continued this year with the ABT-2015) was my preferred AVR video processing (I performed it over Reon XV, Farjouda chips, and lower spec'd ABT chips).
Having owned the 1120's successor both in elite (21) and no-elite (9040) form, I was always impressed by their power, sonic quality, and design. That said, they lacked what had rapidly become basic featureset in 2009 (wide or height presence configuration, only four hdmi inputs, and only analogue video processing). The 1120's little brother the VSX-1020 established a reasonably high bar for the 1120 to hurdle in bringing internet radio, iphone control, six hdmi, and wide/height processing in a tidy package widely available under $500. That said, the 1020 was a very compotent and efficient entry-level receiver, but lacked some of the longer legs for bigger rooms or thirsty speakers. Enter the 1120.
The 1120 shares the same deep chassis of the 9140 and Elite 21. At over 17" deep, it is almost four inches deeper and four pounds heavier than the 1020. It's also over two inches deeper and four and a half pounds heavier than the Denon 891. The design is conservative and almost identical to last year's 9040 with a front fascia that is masculine and angular. Beneath the pop-out front input cover are a USB port for Iphone and Ipod playback, an HDMI port and the setup microphone input. The HDMI input is a nice touch for camcorders and other temporary connected inputs (Onkyo offers similar with 708 while Denon has six rear-mounted HDMI inputs).
The rear panel is also similar to last year's 9040, but four more speaker binding posts have been added for height and wide processing (Pioneer uses MCACC wide since the auto-callibration software is not done via Audyssey DSX). Importantly, the Pioneer has 9.1 pre-outs for those looking to use an external amplifier. Unfortunately, this connectivity has been removed from the Denon AVR2311 and 891 that are natural competitors of the 1120 by price alone.
The remote is very similar to the 1020 in layout, but it is backlit and contains XM and Zone 3. While Pioneer's remote is not as easily identified with small, similar buttons compared to the Denon, it is learning and back-lit, which is a step ahead of the 891/2311/991/3311. Onyko offers a learning remote in the TX NR708, but is not fully backlit.
Setting up the receiver with MCACC is quick and easy, but each MCACC setting measures the white noise and reverb from speakers from only a single memory point whereas Audyssey MultiEQ in the Denon incorporates multiple locations' measurements. This might have an impact on callibration depending on the layout of one's room. That said, I find both tend have a significant impact on accuracy and each have their tweaking benefits.
Once I had setup my 5.1 plus heights layout, I was very impressed with the 1120. While it appears to share a lot of the same audio section with the 9040, it seems to have a wider soundstage, which might have something to do with the presence speakers (I was previously passively bi-amping the height speakers with the 9040). After listening to a variety of blu rays and SACDs from my Oppo, I was nothing but amazed by the power and quality of the sound. Please keep in mind I am of the school that callibrated mid and entry level receivers tend to offer about the same quality audio with incremental differences - speakers (and power to push them) have the biggest impact on quality. That said, this is a very capable receiver that keeps putting me in trouble with my wife to turn it down!
The 1120 really shines in video processing with the Marvell Qdeo chip that offers very similar deinterlacing proficiency to the ABT-2015, but shines with multiple noise reduction settings. On my 54" panasonic plasma, I have found that video processing via the 1120's noise reduction settings does help clean up noisy 1080i hd programing. That said, its benefit is incremental, and like all video processors, is not magical in its ability to render standard definition sources as blu ray quality. The video processing settings are applicable per input, which is ideal considering most people should only use it for cable boxes and not bdps.
While this receiver does have a few noticeable shortcomings (lack of on screen display and pandora streaming), it is an incredible package at its current street price floating between $600 and $700. Its rare ability to not molest hdmi video and apply meaningful noise reduction is excellent. Its power, flexibility, and connectivity is excellent, though I would like to see 7.1 MCH inputs. All in all, it's a very competitive offering and highly recommended.

Click Here to see more reviews about: Pioneer VSX-1120-K 7.1 Home Theater Receiver

Key Features are I20 Watts x 7 – (20Hz – 20kHz @ 8 ohm w/ .08%THD) It has a 7 Channel Direct Energy Configurable Amplifier with Surround Back. Dolby Pro-logic IIz or B Speaker, THX Select 2 Plus Certified, Dolby True-HD / DTS-HD Master Audio, Advanced MCACC with 9 Band EQ , PQLS – Multi-Channel, Auto Level Control – Multi-Channel, Sound Retriever AIR – Multi- channel . It has a Internet Radio. It supports iPod Digital USB / USB Memory Audio, HDMI 1.4(6 In / 2 out), 3-D and Audio return Channel, Dual HDMI Output, front HDMi In Marvell I080p Video Scaler. Analog to HDMi Video Conversion. It has HDMI to HDMI 1080p Scaling. Component Video (2 in / 1 out). Full Color GUI. It has PC Control with Multi-Zone A/V Pre-out.9.1 Channel Pre-outs, RS-232 & Detacheable Power andLearning Remote Control

Buy Now

Click here for more information about Pioneer VSX-1120-K 7.1 Home Theater Receiver

Read More...

Sony STR-DN1020 3D Blu-ray Disc A/V Receiver (Black) Review

Sony STR-DN1020 3D Blu-ray Disc A/V Receiver (Black)
Average Reviews:

(More customer reviews)
Howdy!
It's been a banner fifteen months. I've been able to slowly upgrade to my A/V system from a crappy one to one of extraordinary magnitude. Yes... my days of watching "Star Trek II: The Wrath of Khan" on the Sony Betamax are over. Now I've been out of the A/V game for some time and have been boning up on what the new technology has to offer. There is amazing gear and technology that is available to people at great prices. The journey I've made, and I'm not talking about the band that replaced Steve Perry with a dude they found on YouTube, has allowed me to update my A/V gear to include the following...
1 Sony STRDN1020 Receiver
1 Sony Bravia NX 800 Series 52' LED TV
1 Sony PS3 Slim 160GB
4 Mediabridge HDMI cables
1 Belkin Subwoofer Cable

Sure I'm a loyal Sony customer, but it's because they have treated me well over the years and I have the stash of still working, but outdated, gear to prove it.
Current SONY holdings...
1 Sony Betamax (1982) Make an offer!
1 Sony VHS Player (1985)
1 SONY HIFI VHS Player (1986)
1 Sony Laserdisc Player (1990)
1 Sony 36" Bravia TV (1995?) Estimated weight 2.56 metric tons
1 Sony 5.1 receiver (1999)
Now I don't want to come off as a Sony snob so I do want to mention that I have the following non-Sony items in my electronic stash.
1 Hasbro Litebrite (1981) Crystal clear pixel display but runs a little hot.
1 Hasbro Easy-Bake Oven (1975) A man's got to eat but runs a little cool.
1 Motorola M500 Bag Phone (1978) Looks great in my 1982 TransCamaro with the T-TopsSo here's my review of the Sony STRDN1020 receiver.
DELIVERY:
It took a week for the arrival but that's because I live in the middle of nowhere (Think Rudolph's trek to the land of broken toys) and didn't pay for expedited shipping. At time of delivery the UPS guy was very impressed with the receiver and it's features having read them off the box. He threw in a pair of complimentary fist bumps. That alone has to be worth one star on the review scale. The box was sealed to protect that "New Stuff Smell".
SETUP:
Well it took longer to extract the old receiver and 83 miles of attached RCA and S-Video cables then it did to install the STRDN1020 and the 3 HDMI, 1 Subwoofer, and 1 network cables. God bless you HDMI inventors wherever you are.
Actual setup was about an hour with 70% of the time spent trying to attach five speakers to the receiver's rear terminals. Folks... PLEASE don't be a cheap a-hole like me... get yourself some banana plugs. I have learned my lesson. NEVER again will I risk peersonal injury to hook up some speakers. Can you really put a price on Carpal Tunnel Syndrome? I hope I don't miss any work ... my dog needs braces.
The included manual was easy to follow and there is a chart on how to hook up your speakers and other components. I initialized the receiver and set up the speaker pattern, network, and audio calibration in about fifteen minutes. The GUI is easy to use but not as intuitive as the menus used on Sony's PS3 and TV's, whatever the heck they call it.

SOUND: All Connections VIA HDMI
Bluray VIA PS3 - This rig sounds great. I have a 2002 JBL 5.1 set up and they've never sounded better. Do you know that scene from "The Notebook" where the crew is robbing the armored car? Of course you don't it doesn't exist. God I hate that movie and the unrealistic bar it has set for us working men. Jim Rockford should be ashamed of himself. Anyway... you probably know the opening of the movie "Heat" where Deniro, Waynegrow and the boys, extract some goodies from the armored car. Now I have the movie on VHS HIFI, Laserdisc, DVD, and Bluray so I guess you can say I'm familiar with the audio recordings and playback of each format. The sound of the receiver and bluray was absolutely phenomenal. It really made the movie more intense. I almost called 911 to report a robbery in progress. I can't wait until they release Breakin' 2: Electric Boogalooo bluray. It's 'gonna be some insane sound!
TV - The Audio return channel is a great feature since I utilize our Sony TV to watch Netflix and Amazon on Demand, and to stream my computer's music. All three sources sound awesome and bring more bang to what are already incredible TV features.

PS3 - I played Call of Duty/Black OPS on the PS3 and once again phenomenal sound. In multi-player mode I can now hear those Orange County punks sneaking up behind me. Sure, they still kill me but now they have to look me in the eye when they do it. Backstabbers!
Cable Box - Great Sound. You feel like you are actually in the middle of one of the fights between the Real Housewives of New Jersey until you realize that you aren't because you have your "Stuff" together. Warning! Those A.S.P.C.A commercials with Sarah Mclachlan are now 10 times sadder.

Tuner: Don't useVIDEO:
I have had no video issues. All connections VIA HDMI. The Cable HD looks great. No sync issues with audio and no loss with running the cable through the receiver instead of straight to the TV.
BRAVIA SYNC Sure it's proprietary and only works on Sony gear but it works great. Hooray for me! Proprietary functionality is my one gripe with Sony but you Apple folks have zero right to complain.
Conclusion
I'm looking forward to growing old or should I say older with the receiver. I look forward to firmware updates that may extend the usefulness of the receiver. This may not be the best receiver on the market at the best price but it does everything most people will need and is very simple to operate. With this Sony, I won't have to send my wife to a three day course at a distant Ramada Inn to learn how to operate the damn thing.
I will update this with a review of the network functions once I've had time to utilize them. Also, I don't roll with Apple products so I will not be using the included Ipod dock.


Click Here to see more reviews about: Sony STR-DN1020 3D Blu-ray Disc A/V Receiver (Black)

Maximize your entertainment experience with Sony's STR-DH1020 receiver. Connect seven HD sources,11 listen to your iPod9 and improve the quality of streamed music. Plus, enjoy incredible 7.1 channel sound quality while you watch 3D sports movies and games from connected 3D devices.4 You can even improve video quality to near HD.6 This great receiver also features an easy-to-use control menu for simple control and a convenient audio calibration set-up so you are assured the best possible listening experience

Buy Now

Click here for more information about Sony STR-DN1020 3D Blu-ray Disc A/V Receiver (Black)

Read More...

Marantz SR5005 Audio Video Receiver (Black) Review

Marantz SR5005 Audio Video Receiver (Black)
Average Reviews:

(More customer reviews)
I recently decided to upgrade my home theater setup, and purchased a Samsung 63" Samsung PN63C8000 63-Inch 1080p 3D Plasma HDTV, Black and wanted a home theater to match. Previously, I had just used my TV speakers (granted, my old Sony XBR had far better speakers than most TVs, but still far short of a dedicated setup). I wouldn't describe myself as an audiophile, but I can appreciate good sound ... it's just that my interest lies more in music and film than in the actual audio/video equipment. My media room is 15'x20', and I wanted a system that would be as good for music as for movies.
Because of my room layout, I decided I was limited to a 5.1 system. I ordered this Marantz SR5005 receiver along with a 5.1 speaker system from Aperion Audio, going their 5T Hybrid HD system. These particular Aperion speakers are fairly power hungry, and I was a bit worried about the SR5005's ability to power them w/o the help of an external amp. I had briefly considered upgrading to the slightly more powerful SR6005 Marantz SR6005 Audio Video Receiver (Black). The excellent technical support staff at Aperion Audio (where I ordered this receiver as well as the speakers) assured me the SR5005 would be more than adequate, and after using the system for a few days I fully agree.
I am extremely happy with the way this system sounds - the sound is simply excellent, for both music and movies. The SR5005 has the power to get plenty of room filling volume (window rattling volume) out of the speakers without any distortion. At the same time, I can hear everything clearly at lower volume as well so there's no need to turn it up unless I want to. As far as sound quality, I give the SR5005 5 out of 5 stars - it's excellent. This impression seems to be supported by other reviews - every review I've read about the SR5005 has nothing but positive things to say about sound quality.
As for the setup, I'm not the most tech savvy person in the world and I have to admit I was a bit intimidated about setting up the SR5005 - these newer AVRs have an incredible amount of setup and playback options, it can be a bit overwhelming at first. However, once I delved into it, the setup turned out not to be too difficult. In addition to the Marantz instruction manual, I highly suggest you google "Outlaw SR5005 Guide", which is a 60+ page setup guide put out by Outlaw Audio (you can also throw them a bone and buy the receiver from them as well, though I didn't) that walks you through the setup process in fairly straightforward "plain english" (or as close to plain english as you can get for a fairly complicated piece of electronics). The SR5005 has plenty of setup options, including the Audyssey auto setup but also plenty of manual options as well - do not pay any attention to the review here stating there are no manual setup options as that reviewer apparently didn't bother to read the manual, in addition to the speaker distance, crossover, and other parameters that can be manually set and adjusted with an SPL meter, the SR5005 offers a 9-band EQ for each of 9 speakers, which I believe breaks down to 7.1 plus either zone 2 or front height speakers.
When setting up my system, I first used the much acclaimed Audyssey automatic setup included with this receiver, along with the included microphone. While the results were pretty good, I wasn't blown away by them. Audyssey gave me a couple of incorrect speaker distances (especially for the sub, which Audyssey set up as way too loud) and some funky crossover points. Aperion recommended I set up the system manually using an SPL meter that they include free with any 5.1 speaker system. While this sounded a bit daunting, after reading the short instruction sheet that came with the SPL meter it proved to be almost as simple as Audyssey. I set all of my speakers with the exception of the sub to "small" (the instructions recommended setting the front towers to "large", but when I did this the SR5005 wouldn't let me set the crossover to my preferred 80Hz, so I changed it to "small"; I set my sub to "LFE+main"), set the crossovers to Aperion's recommended levels, measured the distance from each speaker, and manually adjusted the db level for each speaker while measuring with the SPL meter. This might sound complicated, but actually it's pretty easy, just take your time and read the instructions. After doing this manual setup, I was much happier with the result - in particular the sub was now at an acceptable level (there was too much bass using the Audyssey settings).
I'm extremely happy with this product. The audio quality is excellent and the video processing seems to be excellent as well, and it can be turned off. Note there are a couple of internet comments floating around out there about a "purple hue" caused by the video processor - as far as I can tell that was only a single one-off incident cited by a single reviewer (he mentions this in his review of the SR6005 here on Amazon, which is an excellent review I recommend reading), but it was echoed across the internet as other people on various forums cited that same incident. To be clear, I have no purple hue on my unit and if I did the video processing can be turned off (I'm quite happy with the video processing straight out of my PS3). All in, I'm glad I didn't spend the extra money to upgrade to the SR6005, which adds a bit more power (110w x 7), an upgraded video processor (video quality watching blu-rays on this SR5005 is excellent, so I see no reason to pay up for a better video processor), and some improved display functions (for example to see the volume on this SR5005 you have to look at the front of the receiver as it doesn't display it on your TV, this isn't really an issue for me). If interested, I also recommend the speaker system I referenced from Aperion Audio, as they sound excellent with this receiver and Aperion's customer support was very helpful in explaining the features of both the speakers as well as the receiver, as well as discussing what system would best suit my needs based on room size, preferences etc.
Overall, my rating for the Marantz SR5005 breaks down as follows:
Audio quality - 5 stars
Video quality - 4.5-5 stars
Setup options - 5 stars
Input options - 4 stars (some other receivers offer more HDMI inputs, but 4 was more than enough for me)
Features - 4 stars (displaying the volume on the TV would be nice)
Value - 4.5 stars (4 stars if you buy at the price listed here on Amazon, but you can find better out there if you look)
Overall I break this down to 5 stars as audio quality is by far the most important factor in an AVR, in my view.edit: as of mid-2011 I see Amazon has lowered the price since I purchased mine. Also it looks like Outlaw Audio also lowered the price - at the new Amazon price, this is easily a 5/5 for value and probably the best AV/Home Theater Receiver you can buy at this price level.

Click Here to see more reviews about: Marantz SR5005 Audio Video Receiver (Black)



Buy NowGet 38% OFF

Click here for more information about Marantz SR5005 Audio Video Receiver (Black)

Read More...

Harman Kardon HK 3490 120 Watt X 2 Stereo Receiver with XM Radio-ready Tuner and Dolby Virtual Speaker Review

Harman Kardon HK 3490 120 Watt X 2 Stereo Receiver with XM Radio-ready Tuner and Dolby Virtual Speaker
Average Reviews:

(More customer reviews)
I used the HK 3480 (the precursor to this model) for five years and loved it. The 3490 is even better. The sound is more robust and full, not different, but just more refined. It easily powers my Klipsch Synergy speakers and would pair well with any mid-level speakers. With 120w even inefficient speakers will have more than a enough power to move air.
Further, the 3490 has an important new feature: digital inputs. This is a very nice option for those who have made the jump to an all digital music library and use a digital jukeboxes like the Roku Soundbridge or the Squeezebox. Both players have digital outs and pair up nicely with the 3490.
The difference in quality from digital inputs or analog is debatable, but to my ear, going from the 3480 with analog cables, to the 3490 with optical TOSLINK, there was an immediately improvement in clarity. Songs with delicate sound work came alive. Soft details were more apparent. It's been a great upgrade for me.
It's important to note that the 3490 doesn't leave analog fans in the cold either. It has a very nice tape loop and a wonderful gold plated stereo pickup. In short, whether you're library consists of vinyl or mp3s this amp will do it all.
I have always been a fan of Harmon Kardon, and I bought the older 3480 because I'm a strict fan of stereo music listening. The 3490 is a very smart update to the 3480, bringing it into the 21st century with a host of digital options. For those who rely on an iPod for music, there is specific iPod cradle for this amp that allows you to play your iPod's music effortless over the stereo while controlling it with the HK remote. This amp is also XM Radio ready, just plug in your XM receiver and the HK will allow you to control it.
It's very hard to find a subtle, high powered stereo receiver with these features. The market has sadly moved away to the home theater, multi-channel world, but I'm glad Harmon Kardon is still loyal to their stereo listeners.
Build quality is very nice. It's not a flashy amp, it doesn't light up the room with needless LEDs. It's very understated, and handsome. HK even includes two little inserts that hide the front inputs and bass, treble, and balance controls (nice if you don't want people messing with your settings, or you appreciate a clean look.)
Other than the digital options, the tape loop and the phono pickup, the amp does allow video switching and pass through should you want to integrate into your home theater. The other notable detail are the speaker posts. They allow the use of banana clips or allow you to secure naked wire in two different ways to the posts. This is nice if you don't have a lot of clearance behind the amp.
At this price point, there is simply nothing out there that can compete with this amp in terms of quality, performance, or features.

Click Here to see more reviews about: Harman Kardon HK 3490 120 Watt X 2 Stereo Receiver with XM Radio-ready Tuner and Dolby Virtual Speaker

The HK 3490 is a high current stereo receiver that will give you the best possible audio performance. You can use the optional "Bridge II" to control and navigate your Ipod'. The power rating is 120 watts times two at 8 ohms and 150 watts times 2 at 4 ohms. It has 45 amps of current. It is also XM Ready. It has speaker A/B switching.

Buy Now

Click here for more information about Harman Kardon HK 3490 120 Watt X 2 Stereo Receiver with XM Radio-ready Tuner and Dolby Virtual Speaker

Read More...

Sony BDV-HZ970W Receiver 3D Blu-Ray Home Theater Player BDVHZ970W Review

Sony BDV-HZ970W Receiver 3D Blu-Ray Home Theater Player BDVHZ970W
Average Reviews:

(More customer reviews)
I am very pleased with my purchase. I received it as advertised and within a timely manner. I am enjoying listening to my surround sound right now and can hardly think about what to say because I am listening to such a good sound.


Click Here to see more reviews about: Sony BDV-HZ970W Receiver 3D Blu-Ray Home Theater Player BDVHZ970W



Buy Now

Click here for more information about Sony BDV-HZ970W Receiver 3D Blu-Ray Home Theater Player BDVHZ970W

Read More...

Onkyo TX-SR707 7.2-Channel A/V Surround Home Theater Receiver Review

Onkyo TX-SR707 7.2-Channel A/V Surround Home Theater Receiver
Average Reviews:

(More customer reviews)
My experience with the Onkyo 707 has been a pure pleasure. I endorse it wholeheartedly.
It is being used in my home theater. I think it is very important that I spend a moment describing my theater room's dimensions and speaker set up in order that you, the reader, determine whether my experience with the Onkyo is likely to be yours as well, should you be considering purchasing this particular receiver.
My home theater is approximately 14 x 8 x 18.5 feet; this means the Onkyo must power about 2070 cubic feet. The speaker system is 7.1 ; a Snell E center channel with matching front L/R Snell E speakers. They are of fairly normal sensitivity. The side and rear surrounds are modest JBL's. The powered subwoofer is also JBL . The room is drywalled, heavily draped and carpeted. All electronic equipment is placed in a rack room and controlled by IR repeaters.
Previously, the theater room employed a Pioneer THX 5.1 receiver, model VSX 37 TX. Its sonic performance was ok, doing much better a few years ago with the assistance of two Adcom amplifiers, this necessary to power a 7.1 system and to insure necessary power for the front speakers. It was considered, in its day, fairly high end. It did not have DVI or HDMI inputs/outputs. As time passed, it became clear that the Pioneer could not do justice to the increasing audio capacities within the newer , various DVD and Blu-Ray movies being added to my library.
And so I began to read about the current receiver market, and read of others' experiences with this receiver, as well as of competing models in the Onkyo 707's price range. This was my first Onkyo.
Price:
Listing for $899, it has been available in the range of $479-799 since Thanksgiving 2009. Watch and time your purchase carefully here on amazon! I do wish to emphasize that Amazon has consistently been very competitive in price. And it was Amazon from whom I decided to purchase the 707. It arrived timely and without trauma.
The next model up within the Onkyo line is the 807. It lists for $1099 but street price is naturally lower. Generally, it costs about $200 more than the 707. The price gap between the 707 and 807 widens and narrows from time to time. The 807 has slightly more power, and a few more, distinct features, elsewise, it is very similar to the 707.
At its suggested retail price , and in consideration of the Onkyo 707's features and general performance, the 707 is usually regarded as a midrange receiver. But to be emphasized is that for 4x the cost, you will not get 4x the performance from a different receiver; meaning, today, "midrange" receivers do very very well for most purposes and hit the economy of scale point spot on.
Power:
My Pioneer TX 37 receiver had difficulty powering my Snells when applied to DVD/Blu-ray movies. Often I was required to "dial up", completely, to the Pioneer's maximum volume. And even then, often enough, the results were not satisfactory.
The Onkyo 707 handles the same speakers and theater room with amazing ease. I cannot "dial up" the Onkyo 707 to maximum setting without 2 bad things happening; destroying my speakers and service of divorce papers. I find I only need about 35-40% of the 707's power, and this nonetheless results in "room shaking" sound from speakers that are not built to produce thunderous bass etc. And the bass is clean!
I mentioned the Onkyo 807 above, noting it has modestly more power than the 707. I doubt there is justification, however, to purchase the 807 upon the basis of its higher power capacity, standing alone. And this is why I provide you my room dimensions, in order that this review be evaluated as applicable, or not, to your needs. My sense is that if the 707 doesnt have enough power for a given application, then the 807 will not either. Other reviews here, however, suggest that the 607 Onkyo is underpowered and unsatisfactory, notwithstanding close power specifications between the 707 and 607. I suppose the power performance of the 707 is what Goldilocks needed when she was shopping for a receiver; the 707 is simply a receiver's whose power is "just right"
Sound:
Unbelievable improvement over the THX Pioneer VSX 37TX! Surrounds were awakened, made markedly alive. Separation and effects superb. Audio is very clean. Unlike at least one review here, I find the 707 does a wonderful, thrilling job with music, including when played through theater modes. Le Reve, eg, sounds mind boggling though the THX Cinema mode. Nonethless, the 707 has an option permitting stereo through all speakers, or simply thru the front L/R. Some older movies sound better in the all stereo mode. I am advised that many midrange receivers do not have an all speaker stereo option.
Vocal articulation in movies is very good. Some options produce better sound than others depending on the source material. And the night mode ( to stay married mode) does a very good job of allowing all sounds at relatively lower levels such that you can hear the whispers and enjoy the {mini} booms without a visit from upstairs.
My theater room is prewired for 7.2; meaning, adding additional wiring for additional speaker set ups would now be difficult. That said, you should know that the 707 permits as many as 11 speakers to be run within Zone 1. If you are not familiar with this set up, it simply allows a total of 5 front speakers (permitting vertical and horizonal directional sound). I have not heard this effect and perhaps someome else will describe its value.
There are many audio processing options. All current state of the art formats are processable thru the 707. Historically, receivers offered proprietary audio processing options only to disappoint. Eg, acoustical options like: " Miami Underwater Cave" , "North Carolina Woods" or "U of M/Ohio State coliseum " modes (I jest but I trust you get my point). This is not the case with the Onkyo. Its many audio choices are well thought out and quite legitimate; in fact, these options have very particular reasons to be employed. And the manual provides a chart to guide your selection. Choosing wisely results in even greater audio pleasure. The 707 is a Select 2 THX receiver , and listening to its THX cinema options prove the very real value of THX technology and the resulting certification. This THX label of approval is far more than mere marketing or simple window dressing. Onkyo THX Cinema and other THX modes are very well balanced to the 7.1 ear. To me, THX certification is a feature than goes on the "must have" list when shopping for a receiver.
In evaluating a receiver's audio abilities, and deciding whether to upgrade, I believe it is very important to measure the receiver you are considering in view of what it can do with your existing movie/music library; meaning, most of your library probably lacks many of the latest audio codecs. So what improvements can you get with the 707? That is why I described my previous equipment when beginning this review. Against my background, the 707 has been a huge step up in audio perfomance when processing my existing library containing mono. stereo, Dolby, THX, DTS etc. Allbeit an overused expression , the Onkyo 707 blows away the audio performance of my Pioneer TX 37. The sound of my music and movies, when processed through the 707, are greatly improved.
Heat:
A fairly common criticism is that this receiver (and the 807) run "hot"; meaning, toooo hot in the most critical reviews. Two comments. First, the 707 has a cautionary , instuctional sticker on its top, stating that it occasionally runs "fairly hot". This means dont put anything on the receiver's top ( like your favorite Blu-ray or beverage). Such is no different than stating "dont use the blow dryer in the tub while bathing". Just common sense. Second, my experience with the 707 receiver is that it does run hot at times (when active-not usually when merely on) but not toooo hot. From time to time it will get fairly warm to hot when not powering anything---but it should be in the standby mode under such circumstances. Standby produces zero heat. (Yes I have watched for the "too hot" issue in light of the criticisms.) Please know that my 707 is in a rack room, placed on the top rack with nothing but air above (the right place for any receiver). The rack room is closet size and the heat issue, well, isnt for me. I have no need for an external fan .
Other Features:
Beyond that already said about the audio quality, I should note that the unit does have Audyssey. The 707 includes a microphone with a generous amount of line permitting hook up to a fairly distant receiver (that was my case). This was my first experience with acoustic adjustment using Audyssey or any equivalent. The Pioneer TX 37 permitted the manual setting of speaker distance and volume levels of the speakers on an individual basis, but went no further. In my case, this meant alot of experimentation (I do not own a sound meter, I walked around alot at night clapping my hands-and that wasn't moments of self-applause.) Setting up and executing the Audyssey system was a breeze, taking about 15 minutes. I should tell you that I used the 707 receiver in its natural default settings briefly, just to hear and determine if any real differences resulted from employing the Audyssey option with my movies and music. Well, yes. The brightness and front center domination produced by the 707's default settings were reduced to appropriate levels, and the surrounds greatly improved as a consequence. My previous set up with the...Read more›

Click Here to see more reviews about: Onkyo TX-SR707 7.2-Channel A/V Surround Home Theater Receiver



Buy NowGet 33% OFF

Click here for more information about Onkyo TX-SR707 7.2-Channel A/V Surround Home Theater Receiver

Read More...

Harman Kardon AVR 3600 85-Watt x 7.1-Channel High Performance Home Theater Receiver (Black) Review

Harman Kardon AVR 3600 85-Watt x 7.1-Channel High Performance Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
This reciever is incredible. I am running Bowers and Wilkins (B&W) 600 series speakers with it, and it sounds amazing. You hear incredible clarity. I had an older model that the HDMI port stopped working on, and I sent it back to HK and they shipped me this model which is quite a bit nicer than the old model I had.
The video quality on this is quite nice-- I run all my video sources into the receiver with HDMI (xbox 360, PC, blu-ray, dish/tivo) and run one HDMI cable to the TV. But... you should buy this reciever for the SOUND. It does have 7.1 but nothing really uses this format, so the extra $500 or so on those 2 extra speakers isn't worth it IMHO. It also has a second zone, which I'm using for speakers that are wired to my patio.
I ordered a second unit (the 2600 model) for an additional living room. If you have small (bookshelf) speakers consider the 2600 model-- the 3600 model is great for tower speakers. It puts out plenty of power, the HK receivers are high-current, so 85 watts in an HK is way more than 100 watts in a Sony. The sound clarity is excellent, and I recommend pairing it with high-quality speakers (B&W 600 or CM series are an excellent choice).

Click Here to see more reviews about: Harman Kardon AVR 3600 85-Watt x 7.1-Channel High Performance Home Theater Receiver (Black)

For more than 50 years, Harman Kardon products have been engineered to deliver the ultimate listening experience. That tradition continues with Harman Kardon's new AVR 3600 home theater receiver. High performance starts with a high-current, ultra-wide amplifier design which delivers uncomprimised realism and dynamics from your all your music and movies, including today's latest high-definition sources like Blu-ray. Connect your Blu-ray player to the AVR 3600 and it will play back the high-resolution Dolby TrueHD and DTS-HD Master Audio soundtracks with stunning detail. The AVR 3600 can even deliver an exciting 5.1 or 7.1 surround experience from sources that aren't in encoded in surround sound using proprietary Logic 7 processing. This includes an iPod or iPhone with the included Bridge III dock for iPod.The AVR 3600 adds the latest sound processing technology from Dolby laboratories called Dolby Volume processing. Set your preferred volume once and Dolby Volume maintains that level across all your content no matter what source you happen to be listening. When it comes to video, the AVR 3600 sets the same performance standard that it does for audio. Using advanced Faroudja processing, video is upscaled to stunning 1080p resolution while display settings can be indpendently optimized by source for the best picture possible. Setting up and using the AVR 3600 couldn't be easier.The AVR 3600 can be set-up to deliver sound to a second zone for a whole house audio system and is even capable of being integrating into a powerful A-BUS distributed audio system. Finally, a newly developed high-definition full-color on-screen menu system utilizes both pictures and text to guide you in setting up your home theater system while calibration and equalization is both easy and accurate with the included EzSet/EQ calibration system.

Buy NowGet 56% OFF

Click here for more information about Harman Kardon AVR 3600 85-Watt x 7.1-Channel High Performance Home Theater Receiver (Black)

Read More...

Harman Kardon AVR 2600 High Performance, 65W X 7, 7.1 channel iPhone compatible Home Theater Receiver with Dolby Volume and Upscaling to 1080p (Black) Review

Harman Kardon AVR 2600 High Performance, 65W X 7, 7.1 channel iPhone compatible Home Theater Receiver with Dolby Volume and Upscaling to 1080p (Black)
Average Reviews:

(More customer reviews)
THE AVR-2600 is friggen awesome!
...how's that?
Like any receiver, you can spend a good amount of time setting this one up, and getting everything right. Harman/Kardon has done a lot to help with the graphical user interface and a very clean and easy to use OSD which is digitally converted and upscale by the receiver so that you do not need to run an analog cable to see the OSD...you can see it right through your HDMI if you want. The easy EQ Setup is okay -- it was very good at gauging speaker distances (and therefore delays), but terrible at determining levels/volumes for each speaker. I have 2 speakers (front left and front right) that are equadistant from the listening point...the HK system set one to +2db and the other to -7db...no idea how that happened... Anyway, I can overlook this as I am fully capable of setting these levels myself and the GUI makes the manual adjustment simple.
I have read on forums that some people have had trouble with the video, and even with HDMI bypass. I did not see this at all, and I tested the HK rigorously in this regard. My experience was that the HDMI Pass-Through worked flawlessly as tested from my HDTV Tuner, my Xbox 360, my Wii, and my standard def TiVo. All of them passed through as expected if I set the HK to do so. Similarly, if I allowed the HK to upscale or downscale, it did that too! I did not have a PS3 available to test at this time...but I soon will and will edit this review if necessary!
Audio Lag: There is a moment of audio lag upon switching sources...but my HK AVR-435 had this also and have many other receivers I have toyed with. I take it as expected. So I lose the first 1 second of audio...if it is really important I can usually pause the video feed and wait for the HK to make adjustments before playing (so I don't lose the sound)...but seriously, how often are the first 1-3 seconds of audio that important when starting any game/video? Once the audio has begun, I get no audio drop-outs whatsoever.
Dolby Volume is awesome! I hated the fact that with my old receiver I always had to remember to crank the volume way down before switching from my Xbox 360 (connected via component) to my TiVo (connected via RCA) because the TiVo volume was SO MUCH LOUDER naturally. Now, not only does Dolby Volume control loud commercials...but it keeps a constant volume from one input to the next...so if I switch from my TiVo to my Xbox and back to my HDTV, then over to my Wii...the volume is always consistent without me having to fight it!
In conclusion, for me -- everything works PERFECTLY, sounds terrific, and looks brilliant! I am very happy!

Click Here to see more reviews about: Harman Kardon AVR 2600 High Performance, 65W X 7, 7.1 channel iPhone compatible Home Theater Receiver with Dolby Volume and Upscaling to 1080p (Black)

For more than 50 years, Harman Kardon products have been engineered to deliver the ultimate listening experience. That tradition continues with Harman Kardon's new AVR 2600 home theater receiver. High performance starts with a high-current, ultra-wide amplifier design which delivers uncomprimised realism and dynamics from your all your music and movies, including today's latest high-definition sources like Blu-ray. Connect your Blu-ray player to the AVR 2600 and it will play back the high-resolution Dolby TrueHD and DTS-HD Master Audio soundtracks with stunning detail. The AVR 2600 can even deliver an exciting 5.1 or 7.1 surround experience from sources that aren't in encoded in surround sound using proprietary Logic 7 processing. This includes an iPod or iPhone with the optional Bridge III dock for iPod.The AVR 2600 adds the latest sound processing technology from Dolby laboratories called Dolby Volume processing. Set your preferred volume once and Dolby Volume maintains that level across all your content no matter what source you happen to be listening. When it comes to video, the AVR 2600 sets the same performance standard that it does for audio. Using advanced Faroudja processing, video is upscaled to stunning 1080p resolution while display settings can be indpendently optimized by source for the best picture possible. Setting up and using the AVR 2600 couldn't be easier. A newly developed high-definition full-color on-screen menu system utilizes both pictures and text to guide you in setting up your home theater system while calibration and equalization is both easy and accurate with the included EzSet/EQ calibration system.

Buy NowGet 56% OFF

Click here for more information about Harman Kardon AVR 2600 High Performance, 65W X 7, 7.1 channel iPhone compatible Home Theater Receiver with Dolby Volume and Upscaling to 1080p (Black)

Read More...

Harman Kardon AVR1600 High Performance, 50W X 7, 7.1-Channel A/V Receiver with Dolby Digital Plus/Dolby TrueHD and DTS-HD Master Audio Decoding (Black) Review

Harman Kardon AVR1600 High Performance, 50W X 7,  7.1-Channel A/V Receiver with Dolby Digital Plus/Dolby TrueHD and DTS-HD Master Audio Decoding (Black)
Average Reviews:

(More customer reviews)
Got this in the mail a couple of weeks ago. It is a very attractive unit, couple of things I don't care for.
1. Can't ever turn off the bright power on light. Apparently some people couldn't remember to turn off the unit when they killed the display, so now I have this bright white light that won't turn off.
2. HDMI passthrough only kinda works. The main reason I bought this thing was to pass HDMI from my various devices through the single source (and for its audio sync capabilities). Unfortunately for me, while my HTPC straight to the tv works like a champ, I only get a black screen for video (audio works fine though...) when passing through this device. From what I can tell this is a common problem with the 1600 (go check out the forum for owners).
3. HK support kinda sucks. Sent an email last week. No reply. Called them during business hours, had to leave a message. So far no help from them.
I have worked around this by just not using the HDMI, buttt...was kinda the whole reason I bought this, now its just like the one i replaced it with, bummer. In the end it looks pretty good and works pretty good, just not as good as they would want you to believe.
**** UPDATE ****
Short update, about one year after purchase I stopped by the Harman Kardon site to see if they were ever going to update this thing to fix my HDMI issues, and lo and behold... they did! There is a product update link on the 1600's support page:
[...]
Support Tab --> Product Updates --> Download the update.
This update is supposed to update a few bugs, and most importantly the HDMI issue of not passing video from random devices (media pc's, game consoles, etc..). I downloaded and installed (you'll need a 400Mb or larger thumb drive ((not sure why cause it was tiny, but that's what it says)) to do the update). The update was straightforward and took less than 5 minutes once you have the thumb in there (front panel usb port).
Anyway....the video now flows through, my media pc can now pass 5.1 (or 7.1) and the video actually looks nicer than when it went straight to my tv (deeper blacks or something, looks good). Harman support is still pretty poor, but the product performs so dang good for what it cost, and looks great doing it. Took this thing from 3 to 5 stars, light is still annoying but I'll let it slide.

Click Here to see more reviews about: Harman Kardon AVR1600 High Performance, 50W X 7, 7.1-Channel A/V Receiver with Dolby Digital Plus/Dolby TrueHD and DTS-HD Master Audio Decoding (Black)

For more than 50 years, Harman Kardon products have been engineered to deliver the ultimate listening experience. That tradition continues with Harman Kardon's new AVR 1600 home theater receiver, which offers an affordable way to enjoy the best sound experience possible. High performance starts with a high-current, ultra-wide amplifier design which delivers uncomprimised realism and dynamics from your all your music and movies, including today's latest high-definition sources like Blu-ray. Connect your Blu-ray player to the AVR 1600 and it will play back the high-resolution Dolby TrueHD and DTS-HD Master Audio soundtracks with stunning detail.The AVR 1600 can deliver an exciting 5.1 can deliver an exciting 5.1 or 7.1 surround experience from sources that aren't in encoded in surround sound using proprietary Logic 7 processing. Have an iPod or MP3 player? The AVR 1600 even has a compressed music enhancer that will improve the sound quality of compressed music tracks. Setting up and using the AVR 1600 couldn't be easier. A simple on-screen menu system will guide you in setting up your home theater system while calibration and equalization is both easy and accurate with the included EzSet/EQ calibration system.

Buy Now

Click here for more information about Harman Kardon AVR1600 High Performance, 50W X 7, 7.1-Channel A/V Receiver with Dolby Digital Plus/Dolby TrueHD and DTS-HD Master Audio Decoding (Black)

Read More...

Yamaha R-S500BL Stereo Home Theater Receiver (Black) Review

Yamaha R-S500BL Stereo Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
If you love classical music CD's this is for you. Power, clarity, timbre and atmosphere; puts my old Marantz to shame. Makes my 30 year old Technics speakers sound like a state of the art system. There's also receptacles for a second set of speakers in another room. Unless you have a really huge house I don't see why you'd need an s-r700.
W/respect to FM reception; if the signal is a bit weak, it'll go on mute rather than play static interference. I may have to hook up an outdoor FM antenna.

Click Here to see more reviews about: Yamaha R-S500BL Stereo Home Theater Receiver (Black)

The Yamaha R-S500BL Stereo Home Theater Receiver assures total music enjoyment with 75 watts per channel of pure, clean power, ToP-ART stability, Continuously Variable Loudness Control, 40 AM/FM station presets, built-in port for supported Yamaha iPod docks (sold separately), and automatic power management.

Buy NowGet 15% OFF

Click here for more information about Yamaha R-S500BL Stereo Home Theater Receiver (Black)

Read More...

Sony STR-DN1010 7.1-Channel A/V Blu-Ray Receiver Review

Sony STR-DN1010 7.1-Channel A/V Blu-Ray Receiver
Average Reviews:

(More customer reviews)
Introduction:
So, I finally found myself in a position to upgrade my home audio. For many years I used and rather enjoyed my 5 dic DVD changing home theater in a box (Sony DAV-HDX500/i BRAVIA Home Theater System) but still didn't feel like I was getting the full audio experience out of my movies and music. Since I recently purchased a new 3D TV Samsung UN55C7000 55-Inch 1080p 240 Hz 3D LED HDTV (Black) and I already had a PlayStation 3 160 GB I figured my best option was to find an A/V receiver that would make the most of the 3D Blu-Ray functionality of the PS3 and the Samsung UN55C7000. After much research, and slowly piecing together a 7.1 collection of quality speakers, I decided to take a gamble and purchase the Sony STR-DN1010.
Initial Setup:
When the STR-DN1010 arrived via UPS I was excited. Upon unboxing, I immediately noticed the sleek and contemporary design and was pleased that it went so well with the decor in the family room. Having already run the speaker wires all I needed to do was; connect the wires to the appropriate receiver ports; connect the PS3, DVR/cable box, and TV; and plug the receiver's power in.
I open the user manual and it takes you through the usual inital setup steps I previously accomplished, so I flip to the speaker calibration section. Included in the box is a Auto-Calibration microphone which works surprisingly well. All I needed to do was plug it into the front of the receiver and follow the steps in the manual. This is where it gets a little complicated. I wanted to manually adjust my speaker but was having trouble navigating the on-screen GUI (graphical user interface). Response from the GUI had slight latency issues (as in it wasn't a 1:1 response from the remote commands). The manual seems to be made for above average tech consumer but I managed to figured most of it out and everything worked flawlessly.
Audio and Video Performance:
After everything was tweaked to my liking I first tested the audio performance from the cable box. Sound was great for the most part but after cycling through the numerous sound modes I noticed that in Sports mode audio sounds like someone speaking into a plastic tube, this was a minor complaint. Sports in general look and sound phenominal.
Next I tested Blu-Ray performance via the PS3. I checked the audio quality using The Matrix Blu-Ray on the scene where Neo and Trinity break into the building where the agents have Morpheus held captive. From the booming shotgun fire to the loud thud of guards getting kicked to the high twinkling of expended shells hitting the floor, I was in awe of the clarity of sound not to mention the crisp quality of video. Next I checked out the 3D video quality of Despicable Me 3D. Absolute perfection I couldnt find a thing to complain about here.
Since I had a Sony TDM-IP1 Digital Media Port iPod Dock from my previous home theater in a box I connected it to the receiver and plopped my ipod onto it to test my digital audio collection. Since I like The Roots (hip hop band) and they use live instrumentation in most of their music, I decided to use the album "How I Got Over" as my test material. Bass guitars sounded smooth and organic, percussion was precise and thumping, and vocal sounded live. Basically it all sounded like I was right in the studio with the artists. Great reproduction from the receiver, once again no real complaints here.
Conclusion:
In closing, this A/V receiever was everything I was looking for. I purchased an open box item here on Amazon so I only paid a little over $300 USD for it with free super saver shipping. Considering the price and performance I got this receiver, I feel like I got a hell of a deal. As far as gripes and complaints they're minor. The plastic speaker terminals used to connect the speaker wires to the receiver are a little cheap but sturdy enough to get the job done. I suggest you buy banana plugs to offset this. Another drawback is the lack of HDMI inputs this receiver has compared to comparable receivers of other brands (this has 4 in and 1 out, most others have 6 HDMI inputs). And lastly, not so much a problem for me but if you dont have a Sony Ipod dock you have to shell out roughly another $100 just to get on screen control of your Ipod through the receiver. Of course, you could always just use a 3.5mm audio cable to connect your ipod/mp3 player but you miss out on the on screen control. The manual requires a Rosetta Stone to decipher it, nuff said. I hope this review was helpful and if it was please vote up for me. Thank you for taking the time to read this.7.1 Home Theater Speakers:
-Sony SS-CN5000 Dual 5.25" Center Channel Speaker (each, black)
-Sony SSF-7000 Floor-Standing 4-way Speaker with 8" Woofer (Pair)
-Sony SS-B3000 Bookshelf Speakers with 8-Inch Woofer (Pair, Black)
-Sony SS-B1000 5 1/8-Inch Bookshelf Speakers (Pair)
-Sony SA-W2500 Performance Line 100 Watt SubwooferBy the way, check out the images above to get an idea of the STR-DN1010's scale

Click Here to see more reviews about: Sony STR-DN1010 7.1-Channel A/V Blu-Ray Receiver

Take your high-definition surround sound experience to the next level with the STR-DN1010 7.1-channel Blu-ray Disc A/V receiver. Enjoy 3D images while hearing sound closer to the way it was captured, plus improve image quality of non-HD video sources to HD using one convenient cable. Offering plenty of connectivity options for your expanding lifestyle, this A/V receiver features 4 HDMI inputs, 3 component inputs and is SIRIUS Satellite Radio-ready. You can also share your music in multiple rooms with wireless 2nd zone technology.

Buy Now

Click here for more information about Sony STR-DN1010 7.1-Channel A/V Blu-Ray Receiver

Read More...